Intercom; Pairing - Interphone F5MC User Manual

4 – Intercom
F5MC allows intercom communication (INTERCOM) between multiple devices in
conference mode (people speak at the same time).

4.1 Pairing

Before starting the communication between headsets, is necessary to pair together the
units. This process has to be done only one time. F5MC will automatically recognize devices
previously paired.
F5MC is compatible with all range of INTERPHONE device (also previous series) and by
ANYCOM function is also compatible with other brands of helmet Bluetooth headsets.
Each F5MC can be paired to maximum two other units. To set the conference communication
between 3 and 4 users follow instruction of Chapters 4.3/4.4.
If a F5MC unit has been paired with two different units, running a third
pairing, with another unit, will delete the pairing with first unit.
4.1.1 Pairing with an INTERPHONE MC unit
With both units in Standby mode (led BLUE (6) flashing):
1. On your F5MC unit press once the UP(2) button and then press once the MFB (1)
button to activate the "SETUP" menu.
2. Press three times the UP(2) button to select "INTERCOM DEVICE SEARCH" feature,
press the MFB (1) until the beep to start the search.
3. On the other unit (F5MC or F4MC or F3MC) press UP(2) button and then press once
MFB (1) button to activate the "SETUP" menu.
4. Press UP(2) button two times, the second MC unit will go in "PAIRING MODE".
5. After few seconds the units will be paired, intercom connection will be automatically
started (led BLUE (6) on). To stop the intercom communication press once MFB (1)
button on one of the two units.
ENGLISH - 11
4.1.2 Pairing with an INTERPHONE unit (not MC).
With your unit in Standby mode (led BLUE (6) flashing):
1. press once the UP(2) button and then press once the MFB (1) button to activate
the "SETUP" menu.
2. Press three times the UP(2) button to select "INTERCOM DEVICE SEARCH" feature,
press the MFB (1) until the beep to start the search.
3. On the second Interphone unit (previous series not "MC"), with unit off, push and
keep pressed the MFB button until the alternate flashing red/blue of unit led.
4. After few seconds the units will be paired, intercom connection will be
automatically started (led BLUE (6) on). To stop the intercom communication press
once MFB (1) button on one of the two units.
4.1.3 Pairing with units not Interphone (other brands) - ANYCOM
With your unit in Standby mode (led BLUE (6) flashing):
1. press once the UP(2) button and then press once the MFB (1) button to activate
the "SETUP" menu.
2. Press four times the UP(2) button to select "ANYCOM SEARCH" feature, press the
MFB (1) until the beep to start the search.
3. On the second unit NOT Interphone start the "phone search/phone pairing mode",
see user manual of NOT Interphone unit for more details.
4. After few seconds the units will be paired, intercom connection will be
automatically started (led BLUE (6) on). To stop the intercom communication press
once MFB (1) button on your F5MC unit.
4.2 Intercom communication between two units (from "INTERCOM" menu)
To start an intercom communication between your F5MC (unit nr1 Pic. 4) and another
one (unit nr2 Pic. 4) follow these steps:
1. Pair units 1 and 2 (chapters 4.1.1/4.1.2/4.1.3), this is necessary only once.
2. With your F5MC unit in Standby mode (led BLUE (6) flashing), press once the MFB
(1) button, connection will be started. The vocal guidance will prompt a message for
intercom activation, BLUE (6) led of F5MC units will lights up. To stop the intercom
communication press once MFB (1) button on your F5MC, both units will go in
Standby mode.
1 2
Pic.4
ENGLISH - 12