Connect Pc And Call; Bluetooth Usb Adapter Led Indicators - Plantronics Calisto 620-M User Manual

Connect PC and call

Bluetooth USB Adapter
LED Indicators
1 Power speakerphone on.
2 Insert Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turn
solid blue to indicate the speakerphone is connected to the PC. The LED remains solid blue
when not on an active call.
NOTE
Do not insert directly into a docking station or hub.
NOTE
It is normal to see the LED flash at start-up before connection is established.
3 Ensure Microsoft Lync/Office Communicator is running on your PC. Load Plantronics Spokes
software by visiting www.plantronics.com/software
NOTE
The Calisto 620-M works plug-and-play with Microsoft Lync/Office Communicator and
requires no drivers or additional software; however, the optional Plantronics Spokes software does
enable additional features. Please
more information.
4 Check your audio settings, as necessary.
Confirm the speaker and microphone settings for your PC softphone are set to
BT300C.
®
Windows 7
Go to Control Panel -> Sound-> Playback tab, and set the Plantronics BT300C device as both the
Default Communications Device and the Default Audio Device. In the Playback tab, this is
indicated by the green tick.
®
Windows XP
Go to Control Panel -> Sounds and Audio Devices, and in the Audio tab set the Plantronics
BT300C for both the Sound playback and Sound recording sections. In the Voice tab, select the
Plantronics BT300C item for both the Voice playback and Voice recording sections.
5 Make a test call from your computer softphone. During an active call, the Bluetooth USB
adapter will flash blue.
6 End the call by pressing the speakerphone call button.
Speakerphone powered off
Paired/Connected
Active call
Audio listening
and click on "Download Now".
see the Plantronics Spokes software
None
Solid blue
Flashing blue
Flashing blue
section of this user guide for
Plantronics
10