Solo Port 423 Instruction Manual

Solo Port 423 Instruction Manual

Mistblower
Hide thumbs Also See for Port 423:

Advertisement

- ENGLISH -
Instruction manual
Original instructions
Caution! Prior to operating the unit, please
read the owner's manual carefully, and most
importantly, observe all safety rules.
Observe the maintenance guidelines closely to
ensure the long service life of your equipment.
Your dealer will be glad to assist you with any
questions.
EC declaration of conformity
declaration of conformity on a separate piece of
paper forms part of these operating instructions.
Packaging and disposal
Please keep the original packaging in order to
protect the equipment against transport damage in
case you ever need to ship it or transport it. If the
packaging materials are no longer required then
they must be disposed of properly in accordance
with applicable local regulations. Cardboard
packaging materials are raw materials which can
be recycled or reused.
At the end of the equipment's service life, please
make sure that you dispose of it properly, in
accordance with the official directives and
regulations that apply in your area
In the best interest of continued technological
progress we reserve the right to change the design
and configuration of any product without prior
notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual
Mistblower
The following symbols are used in this manual and
on the product:
The EC
a: Type designation
b: Serial number
c: Build year (08
Symbols
Always handle this power tool with
particular care
Keep open flames away from the power
tool and the fuel can
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
No-one else may remain in the vicinity of
the motor appliance whilst it is operating.
A breathing mask should be worn when
using poisonous chemicals
Pesticides can be flammable.
Never smoke near the power tool or
where the equipment is refuelled!
Switch off engine
Fuel mixture
Choke open
Operation and warm start
Choke closed,
Cold start position
Type plate
2008)
Port 423
ENGLISH 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Port 423 and is the answer not in the manual?

Questions and answers

Summary of Contents for Solo Port 423

  • Page 1 - ENGLISH - Mistblower Port 423 Symbols Instruction manual Original instructions The following symbols are used in this manual and on the product: Caution! Prior to operating the unit, please Always handle this power tool with read the owner’s manual carefully, and most particular care importantly, observe all safety rules.
  • Page 2: Table Of Contents

    11.4 Checking the spray medium flow rate 12. Draining and cleaning the tank....................12 13. Technical Specifications ....................... 13 14. Maintenance Chart ........................ 13 Please obtain the following practical accessories from your SOLO Dealer: Accessories Part No. Dusting Attachment Allows conversion to dusting unit..
  • Page 3: Workshop Service, Replacement Parts And Guarantee

    • Damages caused by overheating due to dirt build up on the ventilator casing. • Intervention by non-specialized persons, or improper repair attempts. • The use of unsuitable replacement parts or parts other than SOLO original parts to the extent that they cause damage.
  • Page 4: Safety Regulations

    Important Components; Safety regulations 3. Important Components Fig. 1 1. Tank lid / Filler basket with filter 2. Formula tank 3. Formula outlet 4. Spark plug 5. Carburetor 6. Muffler 7. Starter handle 8. Air filter 9. Fuel tank cap 10.
  • Page 5: 4.2 General Safety Instructions

    Safety regulations 4.2 General safety instructions Some parts on the machine have been removed for transport purposes. Prior to first use, the mistblower has to be completely assembled. This mistblower may only be started and used when completely assembled. Read the operating instructions carefully before placing in service and keep them in a safe place. First time users should be instructed by the seller or an expert.
  • Page 6: 5.1 Fuel Tap

    Maintenance and care 5. Maintenance and care With heavy dust conditions and for normal weekly check: thoroughly clean the filter and replace filter if Any cleaning, maintenance or repair jobs should damaged. only be performed when the engine is stopped and with removed spark plug cap.
  • Page 7 We recommend a mixing ratio of 50 parts fuel to 1 part of oil (1:50 – 2%) with the use of special 2- cycle oil “SOLO Profi 2T Oil”. When using other - cycle oils we recommend a mixture ratio of 1:25 (4%).
  • Page 8: Assembly Of Misting Equipment

    Assembly of misting equipment; Adjustment of shoulder straps 7. Assembly of misting equipment Fig. 5 Completely assemble the mistblower before its first use. Fig. 3 Check hose connection to on/off tap and retighten cap nut if required. Shut on/off tap, fill some plain water in formula tank and check for any leakage.
  • Page 9: Filling

    2. Push primer (Fig A) until float-chamber is filled • The strainer has a mesh size of 0.55 mm. Only with fuel (only when engine is cold). use original SOLO strainers, part no.: 42 00 153 Fig. 8 with standard mesh size.
  • Page 10: Operation Hints

    Operation hints 11. Operation hints Misting Output Guide Dosage sleeve • Before every use and before every start of the mistblower check and ensure the machine is in Position 1 0,32 L/min 0,17 0,33 L/min good and safe condition. (throttle operation, L/min ignition switch, safety devices, shoulder strap Position 2 0,63 L/min...
  • Page 11: 11.2 Residual Spray Medium

    Operation hints Wide-range nozzle (7): Dual nozzle (accessories, part no.: 49 00 137): Fig. 11 Fig. 13 When spraying plants and trees we recommend fixing the wide-range nozzle (7) onto the red standard nozzle (4). This ensures that a large area can be sprayed at one time.
  • Page 12: Draining And Cleaning The Tank

    Clean the herbicide/fungicide. corresponding parts and repeat the checking For cleaning, we recommend the SOLO cleaner for procedure. pesticide sprayers that is available in 500 ml Should the actual value be too high, the metering bottles;...
  • Page 13: Technical Specifications

    Technical Specifications; Maintenance Chart 13. Technical Specifications Mistblower Engine type SOLO single cylinder, two-cycle Displacement 72,3 Bore/Stroke 48/40 Power 3,0 kW (4,1 HP / 5700 1/min Carburetor Float Type Ignition electronically controlled magneto ignition, maintenance-free Fuel Tank Capacity Total Formula Tank Capacity Nominal Formula Tank Capacity Max.
  • Page 14 Made in Germany SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-301-130 +49-7031-301-149 info@solo-germany.com export@solo-germany.com...

Table of Contents

Save PDF