Solo Master 466 Evolution Original Instructions Manual

Solo Master 466 Evolution Original Instructions Manual

Hide thumbs Also See for Master 466 Evolution:

Advertisement

Quick Links

Originalbetriebsanleitung,
vor der Benutzung gründlich lesen!
Original instructions,
read carefully before use!
Notice originale,
lire attentivement avant utilisation!
Manual original,
¡lea cuidadosamente antes de usar!
Istruzioni originali,
leggere attentamente prima dell'uso!
Oorspronkelijke gebruiksaanwijzing,
voor gebruik aandachtig lezen!
Originální návod k obsluze,
před použitím si pozorně přečtěte!
Tłumaczenie oryginalnej instrukcji
eksploatacji,
przeczytaj uważnie przed użyciem!
Master 466 Evolution
Motor-Sprühgerät
Motorized
mistblower
Atomiseur à dos
Atomizador de
mochila
Atomizzatore
Motorvernevelaar
Motorový rosič
Opryskiwacz
spalinowy
70275
de
en
fr
es
it
nl
cs
pl
01/2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Master 466 Evolution and is the answer not in the manual?

Questions and answers

Summary of Contents for Solo Master 466 Evolution

  • Page 1 Master 466 Evolution Originalbetriebsanleitung, Motor-Sprühgerät vor der Benutzung gründlich lesen! Motorized Original instructions, read carefully before use! mistblower Atomiseur à dos Notice originale, lire attentivement avant utilisation! Atomizador de Manual original, ¡lea cuidadosamente antes de usar! mochila Atomizzatore Istruzioni originali,...
  • Page 2 Fig. 1 Fig. 2 Fig. 0...
  • Page 3 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7...
  • Page 4 Fig. 9 Fig. 10 Fig. 8 Fig. 11 Fig. 12 Fig. 14 Fig. 15 Fig. 13 Fig. 17 Fig. 16...
  • Page 5 Where a warrantable condition exists, Solo will repair Petrol is highly flammable your small non-road power equipment engine at no cost to you including diagnosis, parts, and labor.
  • Page 6: Safety Regulations

    • Unauthorized modification or changes made to the device. • Intervention by non-specialized persons, or improper repair attempts. • The use of unsuitable replacement parts or parts other than SOLO original parts to the extent that they cause damage. • Using unsuitable fuel or fuel that has been stored too long.
  • Page 7: General Safety Instructions

    applying any other media than the above mentioned liquids! Particularly, aggressive, acid- or solvent-containing liquids or impregnating agents and flammable products must not be sprayed with this device! Within certain limits, the amount to be applied is subject to the position of the spray tube. During operation, if the spray tube is directed upwards at an angle of more than 30°...
  • Page 8: Operating Hints

    5.4 Operating Hints  While running, the engine produces toxic exhaust gas which is odourless and invisible. Never start or operate the machine in closed rooms. Ensure for adequate ventilation in confined areas such as ditches or dips.  No other persons should be present within a circle of 15 meters from the operator. ...
  • Page 9: Important Components

    50mm depending on the arm length of the 6. Important Components operator. Fig. 1 Push the spray tube with twist coupling (G) into the Tank lid / Filler basket with filter pleated hose (C) until locked. Secure with clamp Formula tank (H).
  • Page 10: Fuel Information

    Recommendation: instructions (pay special attention to section 5.6) Use the "SOLO Profi 2-stroke engine oil" at a and the information provided by the manufacturer mixing ratio of oil:petrol of 1:50 (2 %). of the particular spraying agent.
  • Page 11: Operation Hints

    Fig. 10 Starting with warm engine after short stop  Start the engine with choke in open Identification of the tank contents: position. Attach the relevant sticker to the spraying agent tank to indicate the contents of the tank (i.e., Shutting off engine herbicide, fungicide or insecticide).
  • Page 12: Residual Spray Medium

    12.2 Spraying 12.3 Residual spray medium  When applying spraying agent, ensure by using Switch off the appliance as soon as no further liquid is expelled, when the metering body is appropriate measures and procedures that the correctly positioned for spraying, or air bubbles are unintended release of agent to other areas is visible inside the lance supply hose.
  • Page 13: Air Filter Maintenance

    Wipe the air cleaner housing clean with a dry or 13. Maintenance and care slightly damp cloth. Before inserting the filter, the housing and the filter must be completely dry again. Any cleaning, maintenance or repair jobs should Never insert moist or wet foam filters! only be performed when the engine is stopped and Immediately replace damaged filter parts.
  • Page 14: Shutdown And Storage

    13.4 Checking the spray medium flow rate 13.6 Shutdown and storage At the beginning of the spraying season, check Clean the power tool after use. whether the equipment flow rate (l/min) still  Never use aggressive cleaning solutions or corresponds to the „Guide values“ table (see also those containing solvents to clean any part of the item „Maintenance schedule“).
  • Page 15: Ec Declaration Of Conformity

    Hand valve function Check 15. EC declaration of conformity SOLO Kleinmotoren GmbH, Industriestraße 9, 71069 Sindelfingen, GERMANY, declares that the following machine as delivered complies with the provisions in implementation of the following EC directives: 2006/42/EG, 2000/14/EC, 2014/30/EU and 2011/65/EU...
  • Page 16: Technical Specifications

    16. Technical Specifications Mistblower Master 466 Evolution Engine type SOLO single cylinder two-stroke engine Engine capacity 66.5 Bore / stroke 46 / 40 Max Engine power (ISO 8893) Fuel tank capacity Fuel mix ratio: with SOLO 2T Oil 1:50 (2%)
  • Page 17: Made In Germany

    Made in Germany SOLO Kleinmotoren GmbH Industriestraße 9 D-71069 Sindelfingen Postfach / PO Box 60 01 52 D-71050 Sindelfingen DEUTSCHLAND / GERMANY Tel.: +49 (0)7031 301-0 Fax: +49 (0)7031 301-202 info@solo-germany.com http://solo.global/...

Table of Contents