Changing The Batteries - Permobil M300 Owner's Manual
Hide thumbs
Also See for M300:
- User manual (206 pages) ,
- Oweners manual (164 pages) ,
- Service manual (112 pages)
Table of Contents
Advertisement
Owner´s Manual Permobil M300
Changing the batteries
Front battery
1. Place the wheelchair on a level
surface.
2. Run/fold out the leg support and
raise the seat lift.
3. Turn off the main power switch on
the control panel.
4. Put the circuit breaker in the "OFF"
position. It is accessed through a
hole in the chassis cover; see fig.
5. Remove the two knobs holding the
front cover. Remove the front cover
by pulling it upwards/forwards.
Off
The circuit breaker is accessed
through a hole in in the chassis
The front cover is fitted
with two knobs.
Front battery.
94
Maintenance and Repairs
On
cover.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the M300 and is the answer not in the manual?
Questions and answers
Battery are dead is there a way to manually put the seat up to take the battery out
To manually raise the seat on a Permobil M300 to remove the dead battery:
1. Use the seat lift crank to manually raise the seat.
2. If the wheelchair has a fixed seat post or the seat lift isn't working due to dead batteries or a fault, manual raising/lowering is still possible.
3. Raise the seat to the highest position.
This allows access to remove the seat and reach the batteries.
This answer is automatically generated
Ok thanks just don't see a crank is it a bolt that u have to use allen wrench to crank it
The rear wheel spending but don't grip