HP 8360 User Handbook Manual page 291

Menu Map 4
Description
Programming Codes
See Also
HP 8360
User's Handbook
This description is for the Pulse Menu softkey for synthesizers with
Option 002. For the standard 002 Pulse
"Pulse Menu" heading that precedes this one.
This softkey accesses the pulse modulation softkeys. These softkeys
engage external, internal, and scalar pulse modulation. They allow
you to define the rise time, and give access to the internal menu for
defining the parameters of the internally-generated pulse modulation.
Pulse an/Off
Toggles on and off the pulse modulation mode for
an external pulse source.
Pulse an/Off Scalar
Toggles on and off the internal scalar modulation
mode.
Pulse an/Off
Toggles on and off the internal pulse modulation
mode.
Int em al Menu Gives access to the internal menu for defining
the parameters of the internally-generated pulse
modulation.
Pulse Rise Time Fast
Applies a fast rise pulse filter to both internal and
external pulse waveforms.
Applies a slow rise pulse filter to both internal and
external pulse waveforms.
Pulse Rise Time Auto
Automatically applies the appropriate filter
(fast or slow) to both internal and external pulse
waveforms.
I n v e r t I n p u t Inverts the pulse input logic. When active, a +5 V
input turns RF power off.
SCPI: NONE, see the individual softkeys listed.
Analyzer: NONE
(MOD), also see "Modulation" and "Pulse".
Menu
Operating and Programming Reference P- 17