Quantum 6000 XL Specifications

1420
Drive Wheels:
16" 16"
Casters: 9" solid 9" solid
Anti-tips: 8" solid 8" solid
Suspension: ®
Active-Trac with Limited
rear caster suspension
1
Maximum Speed: Up to 4.5 mph Up to 5 mph
Brakes:
Electronic, regenerative Electronic, regenerative
disc brakes disc brakes
Ground Clearance: 4.5" 4.25"
Turning Radius: 25.75" 26.25"
Overall Size:
Length: 46" Length: 47"
Width: 27.25" Width: 30.375"
Drive Train: 2-pole 4-pole In-line
mid-wheel drive mid-wheel drive
Batteries: Two 12 volt, Group 24 Two 12 volt, Group 24
Range per Charge: Up to 15 miles 1 Up to 15 miles
Battery Charger:
8A, Lester off-board 8A, Lester off-board
Electronics: 70A, PG Remote Plus 100A, PG Remote Plus
Weight Capacity: Up to 500 lbs. Up to 650 lbs.
Base Weight:
141.5 lbs. 191 lbs.
Battery Weight: 53.5 lbs. (each) 53.5 lbs. (each)
Colors: Candy Apple Red, Candy Apple Red,
Viper Blue, Viper Blue,
Onyx Black, Onyx Black,
Sunburst Orange, Champagne
Champagne
1) Range and speed vary with user weight, terrain type,
battery charge, battery condition and tire pressure.
QBAR-8-20-07
1650 600 XL 6000 XL
14" solid
14" solid
5" solid 5" solid
6" solid 6" solid
ATX Suspension
ATX Suspension
1 1 1
Up to 4.5 mph Up to 6.5 mph
Electronic, regenerative
Electronic, regenerative
disc brakes disc brakes
3" 3"
20" 22"
Length: 37" Length: 37"
Width: 23" Width: 25.875"
2-pole GLIDE 4-pole Hammer
® ®
Mid-Wheel 6 Mid-Wheel 6
Two 12 volt, NF-22 Two 12 volt, Group 24
1
1 Up to 15 miles Up to 15 miles 1
5A, Off-board
8A, Lester off-board
70A, PG VSI 100A, PG Remote Plus
Up to 400 lbs. Up to 400 lbs.
129 lbs.
170 lbs.
38 lbs. (each) 53.5 lbs. (each)
Candy Apple Red, Metallic Red,
Viper Blue, Onyx Black, Metallic Blue,
Sunburst Orange, Metallic Silver,
Champagne, Pewter, Metallic Black,
Emerald Green, Silver, Sunburst Orange
Kelly Green, Tangerine,
Graphite Blue, Sapphire
Blue, Violet, Mariner
Blue, Cardinal Red,
Spring Green, Solar
Yellow, Pearl Pink
.
866-800-2002 (US) 888-570-1113 (Canada)
Visit us on the web at www.quantumrehab.com
Due to manufacturing tolerances and continual product
improvement, length, width, turning radius and ground
clearance can be subject to variance of + or – 3 %.