Connect To Receiver - Tannoy arena Highline 500 LCR Owner's Manual

CONNECTING THE SYSTEM TO YOUR AV RECEIVER
Wire up the system connecting each speaker to the appropriate terminals
on the receiver or amplifier making sure that cables connect red to red
terminals (+ to +) and black to black terminals (- to - ).
Please note : (+) is shown as grey, (-) is shown as white.
Take care to distinguish between left and right channels and the front and
rear channels, as seen from the viewing position.
This is a very important stage in setting up. Getting things wrong at this
stage is the most likely reason for disappointing results.
r F n o R t g i t h
Rear Right
Centre
F/R C
R/R SUB
Subwoofer
(+) (-)
2
16
F/L
R/L
(RCA cable)
r F n o L t t f e
Rear Left