Advertisement
Quick Links
Advertisement
Related Manuals for Tannoy REVEAL TS12
Summary of Contents for Tannoy REVEAL TS12
- Page 1 the evolution revealed...
- Page 2 TS12 500W RMS 26Hz(-6dB) 15Hz 2 x line level phone 2 x XLR balanced 2 x XLR balanced (direct or 80Hz high pass) 2nd order low pass, 50Hz - 150Hz, -6dB After approximately 12 mins. in absence of input signal 300mm (12“) Closed box 22 litre / 0.78cu.ft...
- Page 3 & & & & PERFORMANCE TS10 Output power 200W RMS 300W RMS Low frequency response 32Hz(-6dB) 29Hz(-6dB) Limit for usable output 18Hz 16Hz Inputs 2 x line level phone 2 x line level phone 2 x XLR balanced 2 x XLR balanced Outputs 2 x XLR balanced 2 x XLR balanced...
-
Page 4: Drive Units
Reveal Reveal 66 Passive centre channel Frequency response 60Hz-51kHZ reference monitor Recommended Amplifier Power 80 to 150W @ 8W Optimised bass-reflex loaded Power Handling Average RMS cabinet with 40mm thick front Normal Impedance baffle Sensitivity 92dB for 1W at 1m Two shielded 165mm (6 ”) Distortion... - Page 5 Reveal Frequency response 63Hz-51kHZ Recommended Amplifier Power 50 to 100W @ 8W Power Handling Average RMS Normal Impedance Sensitivity 90dB for 1W at 1m Distortion <0.6% Crossover Frequency 2.9kHz Dispersion (@-6dB) 90 degrees DRIVE UNITS Drive Units - LF/MID 165mm (6 ”) multi fibre paper pulp cone WideBand™...
- Page 6 Activ-Assist™ software is available at no charge from www.tannoy.com for use with your own measurement microphone. A calibrated Tannoy measurement microphone is also available as an accessory from your local Tannoy dealer.
- Page 7 XLR / ” 10 Activ-Assist™ jack combination DIP switches control connector for LF alignment - balanced input mid/near/close field & half/quarter/eighth space compensation Digital input on / off 10 Activ-Assist™ 3-way switch DIP switches (post 2 channel DAC) control mid band selects SPDIF stream and HF shelving trim channel to be decoded...
-
Page 8: Electronic System
80Hz high pass switch for AV use, natural and accurate reproduction 16-way Activ-Assist switch array of the original source. Ready to integrate with your analogue or digital production environment the R66D includes Tannoy’s Activ-Assist™ equalisation technology. - Page 9 HF extended to 51kHz corrects phase response Active bi-amplification (120W LF / 60W HF) Tannoy Activ-Assist™ set-up software enabled Get the big, deep low-frequency performance of an 200mm (8”) woofer with the same purity and articulation of the rest of the Reveal range with the R8D.
- Page 10 Reveal active; now the Reveal 6D takes nearfield monitoring to Flux control rings on LF drivers a new level. Incorporating Tannoy’s exclusive Activ-Assist™ technology allows you to tune the monitor to the room’s acoustics for an unparalleled sonic integration.
- Page 11 PERFORMANCE Frequency response 70Hz-30kHZ Max SPL 109dB Distortion <0.7% Dispersion @-6dB, 10kHz, horizontal 90 degrees DRIVE UNITS Drive Units – LF/MID 130mm (5”) multi fibre paper pulp cone WideBand 25mm (1”) soft dome, neodymium magnet system. ELECTRONIC SYSTEM Inputs 600 balanced XLR/ ”...
- Page 12 See and hear the Tannoy Reveal range at an authorized dealer near you and see for yourself why Reveal is truly the antidote to compromise.
Need help?
Do you have a question about the REVEAL TS12 and is the answer not in the manual?
Questions and answers