Figure 3-10: Adjusting The Ribbon Brake; Figure 3-11: The Anti-Static Brush And Strip - Matan The SprinterB User Manual

General Description
Please contact our Support Team for instructions before attempting to adjust the
Ribbon Brake.
If you have to make an adjustment to the R
torque-meter. The adjustment is made by turning the K
on the brake to between 80 and 90cN-m (Figure ).

Figure 3-10: Adjusting the Ribbon Brake

The Anti-static Brush and Strip
An A
the four Ribbons.
The brush is located next to the unused R
used R
Anti-static Strip

Figure 3-11: The Anti-static Brush and Strip

Sprinter User's Manual
- B and an A
NTI STATIC RUSH
(Figure 3-11, page 3-8).
IBBON
B
IBBON RAKE
- S are installed close to each of
NTI STATIC TRIP
, and the strip next to the
IBBON
Technical Description
, you must use a
T N
NURLED HUMB UT
Knurled Thumb Nut
Anti-static Brush
3-7