Receive Faxes Using The Handset; Send Faxes Using The Handset; Adjust The Handset Volume; Set The Fax Header - HP 1240 Series User Manual

receive faxes using the handset

!
For information on receiving faxes by using the handset, see
manually using the handset

send faxes using the handset

!
For information on sending faxes by using the handset, see
manually using the handset

adjust the handset volume

You can adjust the handset volume from Normal to Loud.
1 Pick up the handset.
2 Press " to decrease the volume or ! to increase the volume.
Note:
information, see
volume.

set the fax header

The fax header prints your name and fax number on the top of every fax you
send.
The fax header information is required by law in many countries/regions.
Note:
set or changed only by authorized personnel. For more information, contact
your authorized HP dealer.
1 Press Setup.
2 Press 3, then press 2.
This selects Basic Fax Setup and then selects Fax Header.
3 Enter your personal or company name at the prompt. For information on
entering text from the front panel, see
4 Press OK.
5 Enter your fax number by using the numeric keypad.
6 Press OK.
user guide
on page 28.
on page 23.
You can also adjust volume of the ring tones and dial tone. For more
adjust the ring volume
In Hungary, the subscriber identification code (fax header) can be
use the fax features
receive a fax
to send a fax
adjust the phone line monitor
and
enter text on page 32.
31