Rejecting Calls; Turning The Microphone On And Off - Siemens HiPath 2000 Operating Instructions Manual

Step by Step

Rejecting calls

You can reject calls which you do not wish to take. The
call is then signaled at another definable telephone
(contact your service personnel).
The phone is ringing. The caller appears on the screen.
s
Press the key shown.
If a call cannot be rejected, your telephone will continue
to ring. The message "Currently not possible" is dis-
played (e.g. in the case of recalls).

Turning the microphone on and off

To prevent the other party from listening in while you
consult with someone in your office, you can temporari-
ly switch off the handset microphone or the handsfree
microphone. You can also switch on the handsfree mi-
crophone to answer an announcement via the tele-
phone speaker (speaker call,
Prerequisite: A connection is set up, the microphone is
activated.
p
Press the key shown. The LED lights up.
or
p
Press the lit key. The LED goes out.
Basic functions
page 35).
25