Page 2
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and...
WARNING: If the TM-T81 produces smoke, a strange odor, or unusual noise, shut down the TM- T81, unplug the power cable immediately, and then contact your dealer or an Epson service center for advice.
When you perform other operations such as loading/replacing roll paper Purpose of This Manual This manual provides information to operators of the TM-T81 printer to describe basic operations to enable safe and correct use of the printer. Unpacking The following items are included with the standard specification printer. If any item is damaged, contact your dealer.
To detach the power switch cover, use a sharp- pointed object. WARNING: If an accident occurs with the power switch cover attached, unplug the power cord immediately. Continued use may cause fire or shock. TM-T81 User’s Manual 5...
Place your fingers in the hollows under the printer cover shown in the illustration below, and pull in the direction of the arrow to open the printer cover. Hollows Remove the used roll paper core if there is one. 6 TM-T81 User’s Manual...
ERROR LED flashing with no printing (and no paper jam) Printing stops if the thermal head overheats and resumes automatically when it cools. If overheating is not the cause, turn the printer off, and after 10 seconds, back on. TM-T81 User’s Manual 7...
Turn the knob of the cutter blade in the direction of the arrow in the illustration below until you see a triangle mark in the opening in the frame. Triangle mark Knob Attach the cutter cover. 8 TM-T81 User’s Manual...
(ethanol or isopropyl alcohol). Autocutter blade Thermal head Epson recommends cleaning the thermal head periodically (generally every 3 months) to maintain good print quality. Setting the DIP Switches Be sure to turn off the printer before removing the DIP switch cover.
Print density (Standard) 138 bytes. reaches 256 bytes. Print density (Darker than standard) Reserved (Do not – Fixed to OFF Print density (Darkest) change) I/F pin 6 reset Enabled Disabled I/F pin 25 reset Enabled Disabled 10 TM-T81 User’s Manual...
Need help?
Do you have a question about the TM-T81 and is the answer not in the manual?
Questions and answers