Drain Kit; Replacement Filters - Gree E-TAC Specifications

FIELD- -INSTALLED ACCESSORIES (CONT.)
Condensate Drain Kit
Part No.: DRAIN- -KIT- -1PK
This universal drain kit may be used internally or
externally to route condensate to a drainage system. It
can be field-installed on any Gree wall sleeve.
Although Gree units are designed to dissipate all the
condensate generated during normal cooling, there
may be times when abnormal conditions cause more
condensate than the unit can dissipate. If condensate
that drips from the wall sleeve is objectionable, this
internal/external drain kit should be installed.
The drain kit may be attached to the exterior right or
left side of the wall sleeve for external draining or
mounted to the room side of the wall sleeve for
internal draining.
A 3 in. (152.4 mm) straight tube and 90˚ curved tube
are supplied to simplify any application (1/2 in. /
12.7 mm OD copper).

Replacement Filters

Part No.: GA-FILTER-10PK
The Gree E-TAC model replacement air filters come
in packages of 10. The filters save energy by
preventing the evaporator coils from being plugged
with dirt and lint. These economical and sturdy filters
are interchangeable and may be washed, vacuumed,
and reused.
Baffle Kit
Part No.: BAFFLE- -KIT- -1PK
The accessory baffle kit ensures a good seal between
the unit and the exterior grille to prevent air recircula-
tion, which can cause system failure.
The accessory baffle kit is required for applications
where a Gree wall sleeve is used without a Gree autho-
rized exterior grille.
IMPORTANT: For internal drains installed
in the plastic wall sleeve, the drain must be
installed on the flat area of the sleeve. It
cannot be installed in the wafer area.

Drain Kit

Replacement FIlters
Baffle Kit
22
19
A07748
A07749
A07275
A A
W W
re re
an an
ne ne
N N
T T
(E (E
ar ar
in in
in in
fr fr
A A
C C
D D
In In