Gree E-TAC Specifications
Packaged terminal air conditioner / heat pump 7,000-15,000 btuh
Hide thumbs
Also See for E-TAC:
- Installation and operation instructions manual (24 pages) ,
- Installation manual (6 pages)
Related Manuals for Gree E-TAC
Summary of Contents for Gree E-TAC
- Page 1 E-TAC (GB Series) Packaged Terminal Air Conditioner / Heat Pump 7,000 --- 15,000 Btuh Distributed By: 1-800-891-4729 roomaire.com Performance and Specifications Engineered Terminal Air Conditioner...
- Page 2 ....RETROFIT/REPLACEMENT The Gree E-TAC Packaged Terminal Air Conditioning If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the your options include: architect, engineer, contractor.
-
Page 3: Advantages For New Construction
HVAC system. NEW CONSTRUCTION RETROFIT/REPLACEMENT The Gree E-TAC Packaged Terminal Air Conditioning If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the your options include: architect, engineer, contractor. -
Page 4: Application Considerations
HVAC system. NEW CONSTRUCTION RETROFIT/REPLACEMENT The Gree E-TAC Packaged Terminal Air Conditioning If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the your options include: architect, engineer, contractor. - Page 5 Bypasses compressor operation and activates electric • Programmable Constant Fan Operation heater for guest comfort Gree Customized Comfort in heating orcooling • Remote Control Options modes T he ultimate in installation flexibility; Wired, • Quiet Fan Start-Up and Stops...
-
Page 6: Easy Access To Chassis
The replacement part 9. GREE products installed outside the continental U.S.A., Alaska, Hawaii, and can be new or a remanufactured part at GREE’S sole option. THIS LIMITED WARRANTY Canada. -
Page 7: Bi- -Directional Discharge Grille
Dipswitch There are many different configuration possibilities, Down through both dip switches and the digital keypad, that allow you to configure the E-TAC for your exact Freeze guard application. See Owner’s Manual for more detailed Setpoint Limit 2 Setpoint Limit 1 information. -
Page 8: Wall Thermostat Interface
The unit has a removable terminal connector to make If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the field wiring easy. See more info on wall thermostat your options include:... -
Page 9: Seamless Basepan
SEAMLESS BASEPAN Seamless drawn basepan add protection against water accumulation resulting from storm-driven rain with heavy wind. Gree’s deep basepan hold up to 1-3/4 gallons (6.6 liters) of water without spilling. CONDENSATE DRAIN VALVE The temperature- -activated drain valve opens when the outdoor temperature drops below 55˚... -
Page 10: Corrosion Protection
If you are replacing a unit in an existing wall sleeve, uniformly covers the outside coil surface with a thick (E-TAC) unit is designed to meet the needs of the your options include: .5 to 1.0 mil layer of protection. This advanced... -
Page 11: Heat Pumps Pay Their Own Way
After the desired temperature conditions have been satisfied, the thermostat Gree’s E-TAC units provide indoor comfort in the automatically switches to heat pump mode. If same manner as conventional air conditioners, compressor failure occurs, thethermostat will provide removing heat and humidity fromindoor air. - Page 12 FIELD- -INSTALLED ACCESSORIES POLYMER WALL SLEEVES For the best performance and longest life, Gree The locating holes in the side and top panels allow for recommends genuine polymer wall sleeves for all easy fastening of the sleeve to wall openings. Refer to installations.
- Page 13 Gree’s wall sleeve molding kit to trim the wall sleeve to the wall. The molding kit is a 1/2 IN. perfect solution and can be used with any Gree wall (12.7 mm) sleeve (matches wall sleeve color). A08395...
- Page 14 The Gree E-TAC Packaged Terminal Air Conditioning colorfast, lightly textured finish that blends well with If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the most exterior finishes. your options include:...
- Page 15 FIELD- -INSTALLED ACCESSORIES (CONT.) SUBBASE IMPORTANT: All standard cord- -connected 265-v E-TAC units will require a Part No.: PTACSUBBASE- -A field- -installed electrical subbase accessory The easy to install, non- -electrical subbase provides per UL and NEC electrical codes. mechanical support and requires no wiring.
-
Page 16: Leveling Legs
The hardwire kit mounts on the front If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the right side of the unit and comes with 36 inches of... -
Page 17: Programmable Thermostat
E-TAC application. The TopTech Com- position in the room. fort Series of thermostats consists of programmable For wiring multiple E-TAC units to one wall thermo- and non-programmable air conditioner and heat pump stat see the Multiple Wall Thermostat Wiring section. -
Page 18: Air Deflector
Our Sound Muzzler is specifically designed and The Gree E-TAC Packaged Terminal Air Conditioning constructed with environmental friendly materials that If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the absorb mechanical sound energy and block offensive your options include: architect, engineer, contractor. -
Page 19: Drain Kit
The accessory baffle kit is required for applications where a Gree wall sleeve is used without a Gree autho- rized exterior grille. A07275 Baffle Kit... - Page 20 If you are replacing a unit in an existing wall sleeve, If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the (E-TAC) unit is designed to meet the needs of the...
-
Page 21: Front View
DIMENSIONAL DRAWINGS AND INSTALLATION DATA - - NEW CONSTRUCTION Proper building practices must be used when If practices are unknown, consult your local architect constructing a wall opening to support a PTAC wall or building contractor. Installed wall sleeve must be sleeve and chassis. - Page 22 If you are replacing a unit in an existing wall sleeve, If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the (E-TAC) unit is designed to meet the needs of the...
- Page 23 TYPICAL WALL INSTALLATION Important Sleeve Installation Considerations: • All Gree sleeves are self pitching and must be mounted level in all directions. • The sleeve should be caulked on all sides, including both inside and outside the building. • If more than 4 in. (101.6 mm) of wall sleeve projects into the room, an accessory subbase must be used for support.
- Page 24 If you are replacing a unit in an existing wall sleeve, If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the (E-TAC) unit is designed to meet the needs of the...
- Page 25 DIMENSIONAL DRAWINGS AND INSTALLATION DATA - - NEW CONSTRUCTION (CONT.) TYPICAL SUBBASE INSTALLATION 0’-3 1/4” MIN. (83) 0’-5 1/2” MAX. (140) 0’-0 7/8” (22) SUBBASE ACCESS OUTSIDE WALL NOTES SIDE SUBBASE LEVELING BOLTS ACCESSORY DRAIN (EXTERNAL OR INTERNAL) NOTES: 1. Accessory subbase is required for applications where: - Wall sleeve extends 4 inches (101.6 mm) or more into the room.
-
Page 26: Wall Thermostat Connections
If you are replacing a unit in an existing wall sleeve, If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the (E-TAC) unit is designed to meet the needs of the... -
Page 27: Performance And Electrical Data
PERFORMANCE AND ELECTRICAL DATA 208/230V HEAT/COOL MODEL MODEL E-TAC GBE SERIES CAPACITY* (Btuh) AMPS WATTS HEAT/COOL MODELS Heating MODEL NUMBER VOLTAGE CAPACITY* (Btuh) AMPS WATTS Rev. Cyc. Electric E-TAC- Cooling HEATER KW COP† RANGE Cooling Heating** Cooling Heating MODEL 07HC230V20A-A... - Page 28 If you are replacing a unit in an existing wall sleeve, If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the (E-TAC) unit is designed to meet the needs of the GBE093B-P 0.028...
- Page 29 PERFORMANCE AND ELECTRICAL DATA 208/230V HEAT PUMP MODELS MODEL E-TAC GBE SERIES CAPACITY* (Btuh) AMPS WATTS HEAT/COOL MODELS Heating MODEL NUMBER- VOLTAGE CAPACITY* (Btuh) AMPS WATTS Rev. Cyc. Electric ETAC- Cooling HEATER KW COP† RANGE Cooling Heating** Cooling Heating MODEL...
- Page 30 12HP265V20A-A 0.028 280/300 16.5 20.46 0.031 16.5 27.16 If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the 12HP265V30A-A 0.031 27.2 27.16 GBA093B-D 0.028 280/300 16.5 your options include:...
- Page 31 EXPANDED RATING DATA COOLING PERFORMANCE - HEAT/COOL MODELS ALL 7,000 NORMINAL BTUH MODELS ALL 9,000 NORMINAL BTUH MODELS Evaporator entering air temp (D.B.) = 80 deg F Evaporator entering air temp (D.B.) = 80 deg F Temp EVAP AIR-EWB (DEG F) Temp EVAP AIR-EWB (DEG F) TEMP (DEG F) AIR TEMP (DEG F) AIR...
- Page 32 If you are replacing a unit in an existing wall sleeve, If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the (E-TAC) unit is designed to meet the needs of the...
- Page 33 EXPANDED RATING DATA HEAT PUMP HEATING PERFORMANCE OUTDOOR TEMP D.B (DEG F) NORNIMAL BtuH SIZE BtuH 5250 5540 6300 6900 7620 7,000 Amps BtuH 6005 6399 8100 8647 9245 9,000 Amps BtuH 7726 8531 10700 11278 12234 12,000 1010 1039 1073 Amps BtuH...
-
Page 34: Advantages For New Construction
If you are replacing a unit in an existing wall sleeve, If you are replacing a unit in an existing wall sleeve, Conditioning (PTAC) unit is designed to meet the (E-TAC) unit is designed to meet the needs of the your options include: your options include: needs of the architect, engineer, and contractor. -
Page 35: Air Infiltration
The result could be If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the system is recommended. warm and humid or warm and dry conditioned space. - Page 36 Sample Calculations If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the will be required between the chassis tube end your options include: architect, engineer, contractor.
- Page 37 Whether you are designing a new structure or for The Occupant replacing packaged terminal air conditioning units in • Heat pump models offer substantial savings an existing building, Gree GA Series will meet your over models with conventional electric needs. resistance heaters •...
-
Page 38: Wiring Schematic
Weather- -protected wall sleeve that goes in place during construction; chassis that slides in place after construction • E-TAC – Typical Wiring Schematic for Models with 5KW Elec. Heaters No seasonal changeover required for cooling or heating - - units are self- -contained comfort systems... - Page 39 The result could be If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the system is recommended. warm and humid or warm and dry conditioned space.
- Page 40 • 1. Do not daisy chain R (24 VAC). No expensive component HVAC system 2. Maximum of 4 E-TAC units can be connected to one single wall purchase thermostat. 3. Wall thermostat wire is field-supplied and should be 18 to •...
-
Page 41: Part 1 - System Description
If you are replacing a unit in an existing wall sleeve, 90.1 for minimum energy efficiency. (E-TAC) unit is designed to meet the needs of the into the room, when tested at eight inches of rain per B. Operating Characteristics:... - Page 42 If you are replacing a unit in an existing wall sleeve, Only) shall disable the compressor in heating (E-TAC) unit is designed to meet the needs of the (E-TAC) unit is designed to meet the needs of the Condenser and evaporator coils to be constructed...
- Page 43 If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the shall be cool to the touch during the heating cycle. box containing a receptacle for corded...
- Page 44 HVAC system. NEW CONSTRUCTION RETROFIT/REPLACEMENT NOTES: The Gree E-TAC Packaged Terminal Air Conditioning If you are replacing a unit in an existing wall sleeve, (E-TAC) unit is designed to meet the needs of the ________________________________________________________________________________________ your options include: architect, engineer, contractor.
- Page 45 ________________________________________________________________________________________ NOTES: ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Catalog No. PTAC-GB-1PD Copyright 2011 Gree Electric Appliance Inc. Printed in U.S.A. Edition Date: 11/11 ________________________________________________________________________________________ Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations. ________________________________________________________________________________________ ________________________________________________________________________________________...
- Page 46 ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Catalog No. PTAC-GB-1PD Copyright 2011 Gree Electric Appliance Inc. Printed in U.S.A. Edition Date: 11/11 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Need help?
Do you have a question about the E-TAC and is the answer not in the manual?
Questions and answers