Related Manuals for Swann ADW-200
Summary of Contents for Swann ADW-200
-
Page 1: Operating Instructions
Advanced security made easy Advanced Digital Wireless Camera and Receiver ADW-200 Operating Instructions SW344-YDW www.swannsecurity.com MYDW290410E... -
Page 2: Before You Begin
Before You Begin IMPORTANT Before connecting power to the camera or receiver, ensure that the antennas are properly attached to both devices. Operating the ADW-200 without the antennas in place can cause damage to the unit, and may void your warranty. -
Page 3: Table Of Contents
Connection Guide Activating Channels & Pairing Pairing Troubleshooting Technical Specifications Helpdesk / Warranty Information Rear Cover Package Contents ADW-200 Camera with Stand A/V Cable ADW-200 Receiver Operating Instructions 2 X Antennas Security Stickers 5V Power Adapter for Camera Mounting Hardware... -
Page 4: Overview
Get set up with the click of a couple of buttons. If you know how to plug in a DVD player, you should have no problems getting the ADW-200 set up. However, this is not to say that the ADW-200 has limited applications - you can connect it to a TV, DVR or even directly to a PC. -
Page 5: Layout
Layout When Placing Multiple Cameras When two or more digital wireless cameras are Antenna placed too close together, the receiver can have difficulty distinguishing between the two signals, for much the same reason as it would be difficult to listen to two people standing side by side and Light Sensor both talking at the same volume. -
Page 6: Connection Guide
Connection Guide Connecting the Camera Attach the antenna to the rear of the camera. Connect the supplied power adapter (5V) to the power input on the camera. Plug the power adapter in to a wall socket. Connecting the Receiver Attach the antenna to the receiver. Connect the supplied power adaptor to the power input on the rear of the receiver. -
Page 7: Television
VCR or DVD recorder Input Input Output Output INPUT 1 INPUT 3 OUTPUT Television... -
Page 8: Activating Channels & Loop Mode
As a result, many DVR’s motion detection function will be triggered each time the receiver changes the channel it is monitoring. Thus, we recommend not using Loop Mode when connecting the ADW-200 to a DVR. For the best results, you’ll need a separate receiver for each camera, each receiver connected to a separate input channel on your DVR. -
Page 9: Pairing
Connecting to a Computer via USB The ADW-200 receiver has a USB port which, when connected to a computer, allows ADW-200 to output video like a standard USB webcam. Compatible operating systems will automatically detect the ADW-200 and install the appropriate device drivers. -
Page 10: Troubleshooting
Troubleshooting Guide Problem: I’m only see a blank screen where I want to see my images. Solutions: Make sure that both the camera and the receiver are receiving power from their supplied power adapters. Ensure that the camera is properly paired with the receiver by following the instructions on page 9. -
Page 11: Technical Specifications
Technical Specifications Video Image Sensor 1/4” CMOS Video Quality 380 TV Lines Number of Effective Pixels VGA (640 x 480), QVGA (320 x 240) Minimum Illumination 0 Lux (IR On) Day/Night Mode Color during day / switches to B&W at night White Balance Automatic Signal / Noise Ratio... - Page 12 Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.
Need help?
Do you have a question about the ADW-200 and is the answer not in the manual?
Questions and answers