Page 2
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
Table of Contents Title Page Introduction ......................... 1 How to Contact Fluke ....................1 Safety Information ...................... 2 Maintenance ....................... 6 How to Change the Battery ..................6 How to Clean the Product ..................6 Specifications ......................7 Standards and Agency Approval ................9...
Introduction The Fluke 62 MAX and 62 MAX + Infrared Thermometers (the Product) can determine the surface temperature by measuring the amount of infrared energy radiated by the target’s surface. Note that the Japanese models indicate Celsius only. Warning Read all safety information before you use the Product.
62 MAX/62 MAX + Users Manual Or, visit Fluke's website at www.fluke.com. To register your product, visit http://register.fluke.com. To see, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals. Safety Information A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test.
Page 7
Infrared Thermometer Safety Information • See emissivity information for actual temperatures. Reflective objects result in lower than actual temperature measurements. These objects pose a burn hazard. • Do not look directly into the laser with optical tools (for example, binoculars, telescopes, microscopes). Optical tools can focus the laser and be dangerous to the eye.
Page 8
62 MAX/62 MAX + Users Manual Table 1. Symbols Symbol Meaning Symbol Meaning This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that you must not discard this electrical/electronic product in domestic household waste. Product Category: With Risk of danger.
Page 9
Infrared Thermometer Safety Information Table 1. Symbols (cont.) Symbol Meaning Symbol Meaning Conforms to European Union Warning. Laser. directives. Conforms to relevant Australian Battery standards. Conforms to China Metrology Certification...
62 MAX/62 MAX + Users Manual Maintenance Caution To avoid damage to the Product, do not leave the thermometer on or near objects of high temperature. How to Change the Battery To install or change the AA IEC LR06 battery, open the battery compartment and replace the battery as shown in Figure 16.
Infrared Thermometer Specifications Specifications 62 MAX 62 MAX + -30 °C to 500 °C -30 °C to 650 °C Temperature Range (-22 °F to 932 °F) (-22 °F to 1202 °F) ≥0 °C: ±1.5 °C or ±1.5 % of ≥0 °C: ±1 °C or ±1 % of...
Page 12
62 MAX/62 MAX + Users Manual 10:1 12:1 Optical Resolution (calculated at 90 % energy) (calculated at 90 % energy) 0.1 °C (0.2 °F) Display Resolution ±0.8 % of reading or ±1.0 °C ±0.5 % of reading or ±0.5 °C Repeatability (% of reading) (2 °F), whichever is greater...
Infrared Thermometer Standards and Agency Approval Ingress Protection Rating IP 54 per IEC 60529 Drop Test 3 meters IEC 60068-2-6 2.5 g, 10 to 200 Hz, IEC 60068-2-27, 50 g, 11 Vibration and Shock EN 61326-1:2006 EN 61326-2:2006 Standards and Agency Approval Compliance ..........
Need help?
Do you have a question about the 62 MAX + and is the answer not in the manual?
Questions and answers