1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. XV-Z90U
  6. Service manual

Sharp XV-Z90U Service Manual

Theator
Hide thumbs Also See for XV-Z90U:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
» SPECIFICATIONS ......................................................................................................................................2
NOTES (for USA) .......................................................................................................................................3
» NOTE TO SERVICE PERSONNEL ............................................................................................................4
» OPERATION MANUAL ...............................................................................................................................8
» REMOVING OF MAJOR PARTS ..............................................................................................................13
» RESETTING THE TOTAL LAMP TIMER ..................................................................................................18
» ELECTRICAL ADJUSTMENT ....................................................................................................................19
» TROUBLE SHOOTING TABLE ................................................................................................................24
» CHASSIS LAYOUT ...................................................................................................................................34
» BLOCK DIAGRAM ....................................................................................................................................36
» OVERALL WIRING DIAGRAM .................................................................................................................38
» SCHEMATIC DIAGRAM ...........................................................................................................................40
» PRINTED WIRING BOARD ASSEMBLIES ..............................................................................................75
Ë ELECTRICAL PARTS ............................................................................................................................81
Ë CABINET AND MECHANICAL PARTS ..................................................................................................94
Ë ACCESSORIES PARTS ........................................................................................................................98
Ë PACKING PARTS ..................................................................................................................................98
» PACKING OF THE SET ............................................................................................................................99
SHARP CORPORATION
SERVICE MANUAL
MODELS
CONTENTS
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
THEATOR PROJECTOR
XV-Z90U
DT-200
XV-Z90U
DT-200
S02S1XV-Z90U/
Page

Advertisement

Table of Contents
loading

Related Manuals for Sharp XV-Z90U

Summary of Contents for Sharp XV-Z90U

  • Page 1: Table Of Contents

    XV-Z90U DT-200 SERVICE MANUAL S02S1XV-Z90U/ THEATOR PROJECTOR XV-Z90U DT-200 MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.

  • Page 2: Specifications

    9.5 lbs. (4.3 kg) (including swivel stand) 8.4 lbs. (3.8kg) (main body only) Supplied accessories Remote control, Two AA size batteries, Power cord (1.8 m), Terminal cover (XV-Z90U), Lens cap (attached on the body), Lens cap strap, Operation manual, Screws for terminal cover (XV-Z90U) Replacement parts...

  • Page 3: Important Service Safety Notes (For Usa)

    XV-Z90U DT-200 IMPORTANT SERVICE SAFETY NOTES (for USA) Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: » Use an AC voltmeter with sensitivity of 5000 ohm WARNING per volt., or higher, sensitivity to measure the AC...

  • Page 4: Note To Service Personnel

    XV-Z90U DT-200 NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5...

  • Page 5: Lamp Replacement

    éviter une exposition des yeux et la peau. Note: Please obtain a lens cap before servicing a Remarque: Priére de se procurer un capuchon models XV-Z90U/DT-200 that is received d'optique acant d'entretien un modéle without one. XV-Z90U/DT-200 qui est livré sans.
  • Page 6 XV-Z90U DT-200 WARNING: High brightness light source, do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly in to the beam of light. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO MOISTURE OR WET LOCATIONS.
  • Page 7 XV-Z90U DT-200 Precautions for using lead-free solder 1 Employing lead-free solder "Front-R/C, LED, DVi-TANi, terminal 2,Rear-R/C and key PWBs" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

  • Page 8: Operation Manual

    XV-Z90U DT-200 OPERATION MANUAL Location of Controls This illustration is XV-Z90U. A body logo is different from DT-200.
  • Page 9 XV-Z90U DT-200...
  • Page 10 XV-Z90U DT-200 LIGHT button (XV-Z90U) FREEZE button (DT-200)

  • Page 11: Connection Pin Assignments

    XV-Z90U DT-200 Connection Pin Assignments...
  • Page 12 XV-Z90U DT-200 Dimensions This illustration is XV-Z90U. A body logo is different from DT-200. Units: inches (mm)

  • Page 13: Removing Of Major Parts

    XV-Z90U DT-200 REMOVING OF MAJOR PARTS 1. Removing the swivel stand and the lamp box. 1-1. Remove lock lever, and remove the swivel stand. 1-2. Loosen 1 scrwew, and remove the lamp door . 1-3. Loosen 3 screws, and take out a lamp box.
  • Page 14 XV-Z90U DT-200 3. Removing the main PWB. 3-1. Remove 6 screws. 3-2. Remove each connector on the main PWB. [DA] [TD] [TF] [BA] [RB] Main PWB [FD] [FB] [PG] [TH] [TC] [FA] [ED] [FC] 4. Removing the Ballast unit. Lens Shift Knob 4-1.
  • Page 15 XV-Z90U DT-200 6. Removing the power unit. 6-1. Remove each connector on the power PWB. 6-2. Remove 2 screws, and remove the power unit fan. 6-3. Remove 3 screws, and take out the power unit as- Power Unit sembly. Power Shield 6-4.
  • Page 16 XV-Z90U DT-200 Precautions in replacing the DMD chip Note: Be careful not to allow dust and fingerprint Mirror adjusting plate on the cover glass of DMD chip and prism surface of optical engine. 1. When you fix 4screws of backer plate assembly,...
  • Page 17 XV-Z90U DT-200 Outline of the optical unit <Layout> Relay lenses Rod lens Reflector Projection lens Lamp UV/IR filter Prism Color wheel DMD chip Zoom ring Focus ring Width Item Function Lamp Light source. DC-driven high-pressure mercury vapor lamp. UV/IR filter Used to absorb ultraviolet and infrared rays.

  • Page 18: Resetting The Total Lamp Timer

    XV-Z90U DT-200 RESETTING THE TOTAL LAMP TIMER You need to reset the lamp timer every time you replace the lamp and confirm it is reset on the “Lamp Timer” menu. How to reset the total lamp timer. 1. Plug the power cord 2.

  • Page 19: Electrical Adjustment

    XV-Z90U DT-200 ELECTRICAL ADJUSTMENT Adjustment Items Adjustment Conditions Adjustment Procedures Initialization of 1. Turn on the power (the lamp lights 1. Carry out the following setting. EEPROM up) and warm up the system for 15 Using the remote controller or press minutes.
  • Page 20 XV-Z90U DT-200 Adjustment Items Adjustment Conditions Adjustment Procedures Adjustment of 1. Feed 480P 100% Black/White win- 1. On the bit-less screen, adjust in the DTV brightness/ dow pattern signal. order of black side Bbright and white contrast 2. Select the following group and sub- side Contrast.
  • Page 21 Confirmation of 1. Receive monoscope pattern signal. 1. Select L2 in the process mode. picture-related Check Picture, Brightness and Sharp- operation ness. Confirmation of 1. Receive the RGB signal. 1. Select L4 on the process mode. Check Picture, Brightness, Red, Blue, Clock, Phase, H-POS and V-POS.
  • Page 22 1. Confirm that Clock, Phase, H-POS operation signal. and V-POS can be automatically adjusted in the VGA/S-VGA/XGA mode. Factory settings 1. Make the following settings. Model Process Remote controller adjustment settings XV-Z90U SS4 "Factory Setting 4" DT-200 "Factory Setting 5"...
  • Page 23 XV-Z90U DT-200 » Entering the adjustment process mode There are following two mothods. » Press the SW2002 on the MAIN PWB. » Press the following keys in this order. Adj up→Adj up→Adj down→Adj down→Adj right→Adj left→Enter » Adjustment mode process menu...

  • Page 24: Trouble Shooting Table

    XV-Z90U DT-200 TROUBLE SHOOTING TABLE Checking of Basic Operation Does the POWER LED light up or Go to "Checking of Power Unit". flicker in red or green? Does the set operate by the set's Go to the "Check of IC2002 and key or the remote controller's around I/O".
  • Page 25 XV-Z90U DT-200 Checking of Power Unit Are connectors in the power unit Securely insert each connector. completely inserted? Close the lamp door completely by Is the lamp door closed screws. completely? Replace the bimetal switch or Is the bimetal switch not cut? press the red button to recover.
  • Page 26 XV-Z90U DT-200 Lamp does not light up. Check the power circuit or the fan Is the cooling fan rotating? circuit of the main circuit. Check around IC9101 circuit, motor Is the color wheel rotating sound driver IC and IC9102, 9003.
  • Page 27 XV-Z90U DT-200 Check of IC2002 and around I/O Does POWER LED flicker in red ? Is it in the stand-by due to This is the failure of Is P1701 (9) pin (P CON0) H? an error? IC2002. Turn on the power again.
  • Page 28 XV-Z90U DT-200 Checking of SOG Circuit Measure the (7) pin of IC5012 with an oscilloscope. Is the composite synchronized The SOG circuit is normal. signal regenerated at proper timing? End. Measure the (7) pin of IC5010 with an oscilloscope. Is there the Y signal including sync Is there output of the (25) pin Check around Q5002.
  • Page 29 XV-Z90U DT-200 Checking of Video Input Feed the composite video signal to INPUT 4. Select INPUT 4 using the End. set's key or the remote controller. Is synchronized signal Does the picture appear? Is the picture disturbed? coming to IC3102 (28) (29)
  • Page 30 XV-Z90U DT-200 Check of component DTV input Input the DTV signal from INPUT 1. Select INPUT 1 with the keys on the main body or the remote control. Is picture outputted? End. Is the picture disturbed? Is the signal coming to the Check of the DVI-TAN1 PWB.
  • Page 31 XV-Z90U DT-200 Checking of Sync Signal Is the horizontal synchronized signal on IC5001 (6) pin? Is the vertical synchronized signal Check the PWB of the signal input on IC5002 (6) pin? part. Is the synchronized signal is Check each IC and the peripheral outputted from IC5009, IC5005, circuit of IC.
  • Page 32 XV-Z90U DT-200 » Formatter Unit Troubleshooting -1/2 Abnormal picture Rainbow-like colors on- Thick, white vertical Blackout Others screen. stripes (flashing). No proper matching in red, green and blue. Are connections made Is connection made Are there dust deposits on Adjustments made on...
  • Page 33 XV-Z90U DT-200 » Formatter Unit Troubleshooting-2/2 Is the voltage at pin (1) IC9301 or its peripheral Is there 60-MHz pulse of the P2002 main PWB circuit defective. signal at TP9025? at high level? Is the P2002 connector properly connected? Is the specified voltage...

  • Page 34: Chassis Layout

    XV-Z90U XV-Z90U DT-200 DT-200 CHASSIS LAYOUT/CHASSIS-ANORDNUNG...

  • Page 35: Block Diagram

    XV-Z90U XV-Z90U DT-200 DT-200 BLOCK DIAGRAM/BLOCKSCHALTBILD...

  • Page 36: Overall Wiring Diagram

    XV-Z90U XV-Z90U DT-200 DT-200 OVERALL WIRING DIAGRAM/GESAMTSCHALTPLAN...

  • Page 37: Schematic Diagram

    XV-Z90U DT-200 DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 230V. Signals are fed by a colour bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
  • Page 38 XV-Z90U DT-200 WAVEFORMS IC3102(35)PIN IC3102(28)PIN IC3102(29)PIN IC3102(31)PIN (R-OUT) (VS-OUT) (HS-OUT) (SCP-IN) H : 20 s/div H : 5ms/div H : 10 s/div H : 10 s/div V : 1V/div V : 1V/div V : 1V/div V : 1V/div IC3102(37)PIN IC3102(39)PIN...
  • Page 39 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-1/8 / HAUPT EINHEIT-1/8...
  • Page 40 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-2/8 / HAUPT EINHEIT-2/8...
  • Page 41 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-3/8 / HAUPT EINHEIT-3/8...
  • Page 42 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-4/8 / HAUPT EINHEIT-4/8...
  • Page 43 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-5/8 / HAUPT EINHEIT-5/8...
  • Page 44 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-6/8 / HAUPT EINHEIT-6/8...
  • Page 45 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-7/8 / HAUPT EINHEIT-7/8...
  • Page 46 XV-Z90U XV-Z90U DT-200 DT-200 Ë MAIN UNIT-8/8 / HAUPT EINHEIT-8/8...
  • Page 47 XV-Z90U XV-Z90U DT-200 DT-200 Ë FORMATTER UNIT-1/5 / FORMATIERER EINHEIT-1/5...
  • Page 48 XV-Z90U XV-Z90U DT-200 DT-200 Ë FORMATTER UNIT-2/5 / FORMATIERER EINHEIT-2/5...
  • Page 49 XV-Z90U XV-Z90U DT-200 DT-200 Ë FORMATTER UNIT-3/5 / FORMATIERER EINHEIT-3/5...
  • Page 50 XV-Z90U XV-Z90U DT-200 DT-200 Ë FORMATTER UNIT-4/5 / FORMATIERER EINHEIT-4/5...
  • Page 51 XV-Z90U XV-Z90U DT-200 DT-200 Ë FORMATTER UNIT-5/5 / FORMATIERER EINHEIT-5/5...
  • Page 52 XV-Z90U XV-Z90U DT-200 DT-200 Ë DVI-TAN1 UNIT / DVI-TAN1 EINHEIT...
  • Page 53 XV-Z90U DT-200 Ë LED UNIT Ë KEY UNIT...
  • Page 54 XV-Z90U DT-200 Ë FRONT R/C UNIT Ë REAR R/C UNIT...
  • Page 55 XV-Z90U XV-Z90U DT-200 DT-200 Ë POWER UNIT / NETZEINHEIT...
  • Page 56 XV-Z90U DT-200 Ë TERMINAL2 UNIT...

  • Page 57: Printed Wiring Board Assemblies

    XV-Z90U DT-200 PRINTED WIRING BOARD ASSEMBLIES LED Unit (Side-A) LED Unit (Side-B) FRONT R/C Unit (Side-A) FRONT R/C Unit (Side-B) REAR R/C Unit (Side-A) REAR R/C Unit (Side-B)
  • Page 58 XV-Z90U DT-200 MAIN Unit (Side-A)
  • Page 59 XV-Z90U DT-200 MAINUnit (Side-B)
  • Page 60 XV-Z90U DT-200 FORMATTER Unit (Side-A) DVI-TAN1 Unit (Side-A) TERMINAL2 Unit (Side-A) KEY Unit (Side-A)
  • Page 61 XV-Z90U DT-200 FORMATTER Unit (Side-B) TERMINAL2 Unit (Side-B) DVI-TAN1 Unit (Side-B) KEY Unit (Side-B)
  • Page 62 XV-Z90U DT-200 POWER Unit (Side-A) POWER Unit (Side-B)

  • Page 63: Parts List

    J TC74HC4538AFT Please call Toll-Free; 1-800-BE-SHARP IC5004 RH-iXA202WJN2Y J IC IC5005 VHiM52347FP-1Y J M52347FP IC5006 VHiTHC4538T-1Y J TC74HC4538AFT in CANADA: Contact SHARP Electronics of Canada Limited IC5007 VHiTC7S00U/-1Y J IC Phone (416) 890-2100. IC5008 VHiTC7S32U/-1Y J TC7S32FU IC5009 VHi7WH126FU-1Y J TC7WH126FU...
  • Page 64 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code FL6001 RFiLN0130CEZZY J Filter DUNTKB226FE01 FL6002 RFiLN0130CEZZY J Filter MAIN UNIT (Continued) FL6003 RFiLN0130CEZZY J Filter FL8001 RFiLN0003TAZZY J Filter FL8002 RFiLN0003TAZZY J Filter Q3507 VS2SA1530AR-1Y...
  • Page 65 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code C3191 VCKYCY1EF104ZY J 0.1 Ceramic DUNTKB226FE01 C3192 VCKYCY1EF104ZY J 0.1 Ceramic MAIN UNIT (Continued) C3193 VCKYCY1EF104ZY J 0.1 Ceramic C3194 VCKYCY1EF104ZY J 0.1 Ceramic C3195 VCKYCY1EF104ZY J 0.1...
  • Page 66 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code C6017 VCKYCY1EF104ZY J 0.1 Ceramic DUNTKB226FE01 C6018 VCKYCY1EF104ZY J 0.1 Ceramic MAIN UNIT (Continued) C6019 VCKYCY1EF104ZY J 0.1 Ceramic C6020 VCEAPF0JW226MY J 22 6.3V Electrolytic C6021 VCKYCY1EF104ZY J 0.1 Ceramic C3573 VCKYCY1HB103KY J 0.01...
  • Page 67 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code R2034 VRS-CY1JF101JY J 100 1/16W Metal Oxide DUNTKB226FE01 R2035 VRS-CA1JF472JY J 4.7k 1/16W Metal Oxide MAIN UNIT (Continued) R2036 VRS-CA1JF332JY J 3.3k 1/16W Metal Oxide R2037 VRS-CA1JF472JY J 4.7k 1/16W Metal Oxide...
  • Page 68 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code R3577 VRS-CY1JF102JY J 1k 1/16W Metal Oxide DUNTKB226FE01 R3578 VRS-CY1JF102JY J 1k 1/16W Metal Oxide MAIN UNIT (Continued) R3579 VRS-CY1JF681JY J 680 1/16W Metal Oxide R3580 VRS-CY1JF100JY...
  • Page 69 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code R8062 VRS-CY1JF470JY J 47 1/16W Metal Oxide DUNTKB226FE01 R8063 VRS-CY1JF102JY J 1k 1/16W Metal Oxide MAIN UNIT (Continued) R8064 VRS-CY1JF103JY J 10k 1/16W Metal Oxide R8065 VRS-CY1JF470JY...
  • Page 70 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code C9061 VCKYCY1CB104KY J 0.1 Ceramic DUNTKB269DE01 C9062 VCKYCY1CB104KY J 0.1 Ceramic FORMATTER UNIT C9063 VCSNDE0GP107MY J 100 Neo Capacitor AF C9065 VCEAPF1CW106MY J 10 Electrolytic C9067 VCAAPC1AJ106MY J 10...
  • Page 71 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code R9554 VRS-CY1JF102JY J 1k 1/16W Metal Oxide DUNTKB269DE01 R9559 VRS-CY1JF470JY J 47 1/16W Metal Oxide FORMATTER UNIT (Continued) R9560 VRS-CY1JF102JY J 1k 1/16W Metal Oxide R9562 VRS-CY1JF330FY...
  • Page 72 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB439DE01 (XV-Z90U) R532 VRS-CY1JF000JY 1/16W Metal Oxide R536 VRS-CB1JF151JY J 150 1/16W Metal Oxide DUNTKB439DE02 (DT-200) R541 VRS-CY1JF102JY J 1k 1/16W Metal Oxide DVI-TAN1 UNIT R546 VRS-CY1JF332JY J 3.3k 1/16W Metal Oxide...
  • Page 73 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB449DE01 (XV-Z90U) DUNTKB447DE01 (XV-Z90U) DUNTKB449DE02 (DT-200) DUNTKB447DE02 (DT-200) KEY UNIT TERMINAL2 UNIT RESISTORS RESISTORS R2502 VRS-CY1JF000JY 1/16W Metal Oxide R401 VRS-TW2ED750JY J 75 1/4W Metal Oxide...

  • Page 74: Power Unit

    XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code TH7003 9HU16570611 J Thermister, RDENCA018WJZZ PTH9M04BB222TS2F333 POWER UNIT CAPACITORS å C7001 9HU23605266 J 2200p AC250V TYPE-KX INTEGRATED CIRCUITS å C7002 9HU23605266 J 2200p AC250V TYPE-KX å IC7001 9HU59350207 J UCC3818D å...
  • Page 75 XV-Z90U DT-200 Ref. No. Part No. Description Code Ref. No. Part No. Description Code R7102 9HU18204907 J 1k 1/8W RDENCA018WJZZ R7103 9HU18001607 J 1k 1/16W R7104 9HU18204907 J 1k 1/8W POWER UNIT (Continued) R7106 9HU18001607 J 1k 1/16W R7107 9HU18205707 J 2.2k 1/8W...

  • Page 76: Cabinet And Mechanical Parts

    XV-Z90U DT-200 CABINET AND MECHANICAL PARTS 1-1-3 1-1-4 1-1-5 1-1-1 1-1-2 2-3-11 2-3-6 2-3-10 2-3-12 2-3-1 2-2-1-3 2-3-5 2-2-1-4 2-2-1-2 2-3-3 2-2-1-5 2-2-3 2-3-4 2-3-9 2-3-2 2-3-7 2-2-3 2-3-8 2-2-2 2-1-4 2-1-1 2-1-3 2-2-1-4 2-1-1-1 2-1-2 2-2-1-5 2-2-1 2-10 2-2-1-1...
  • Page 77 NFANRA007WJ00 J Ballast Fan Not Available - Top Body Ass'y — NFANRA006WJ00 J Exshaust Fan DBDYTA003WJ01 J Top Body Ass'y (XV-Z90U) BP PSPAZA063WJ00 J Ballast Fan Spacer DBDYTA005WJ01 J Top Body Ass'y (DT-200) PSPAZA065WJ00 J Exhaust Fan Spacer 1-1-1 Not Available - Top Body —...
  • Page 78 6-1-34 95U60B1018653 J DMD Sealing Spacer 6-1-35 XBPSD30P06WS0 J Screw (M3 x 6) 6-1-36 XBBSF26P06000 J Screw (M2.6 x 6) PLNS-A013WJZZ J Projection Lens (XV-Z90U) CC PLNS-A014WJZZ J Projection Lens (DT-200) å 6-3 BQC-XVZ90++++1 J Lamp Case Ass'y 95U280M31107K J Screw (M3 x 10)
  • Page 79 XV-Z90U DT-200 OPTICS MECHANISM PARTS 6-1-36 6-1-7 6-1-6 6-1-2 6-1-5 6-1-10 6-1-8 6-1-35 6-1-4 6-1-9 6-1-3 6-1-21 6-1-35 6-1-20 6-1-1 6-1-22 6-1-34 6-1-33 6-1-18 6-1-19...

  • Page 80: Supplied Accessories

    Part No. Description Code Ref. No. Part No. Description Code PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) GCOVAA116WJKA J Terminal Cover (XV-Z90U) SPAKCA132WJZZ - Packing Case (XV-Z90U) — SPAKPA070WJZZ J Polystylene Cover — SPAKCA203WJZZ - Packing Case (DT-200) — XBBSN40P10000...

  • Page 81: Packing Of The Set

    XV-Z90U DT-200 PACKING OF THE SET Polystylene Cover (SPAKPA070WJZZ ) Screw for Terminal Cover (XV-Z90U) (XBBSN40P10000) Operation Manual (TiNS-A286WJZZ:XV-Z90U) Infrared R/C Unit (TiNS-A287WJZZ:DT-200) (RRMCGA064WJSA :XV-Z90U) Questionnaries Card (RRMCGA088WJSA :DT-200) (TCADEA016WJZZ) Polystylene Cover (SSAKAA006WJZZ) AC Cord (QACCDA007WJPZ) Video Cable (DT-200) (QCNWGA001WJZZ)

  • Page 82: Xv-Z90U Dt

    XV-Z90U DT-200 COPYRIGHT © 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Dt-200

Table of Contents