One quick start guide for the above wireless adaptor (optional for 6500W) One CD containing the driver or utility for the above wireless adaptor (optional for 6500W) Do not use the BIPAC-6500 / 6500W in high humidity or high temperatures.
Quick Start Guide The Front LEDs Meaning Lit green when power ON Lit when system is ready Lit green when wireless connection is established. WLAN (for 6500W only Flashes when sending/receiving data. LAN1 Lit green when connected at 100 Mbps. LAN2 Lit orange when connected at 10 Mbps.
Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router The Rear Ports *Only the BIPAC-6500W has a wireless interface and antenna. BIPAC- 6500 router does NOT have an antenna or wireless interface. Port Meaning Power Switch Power ON/OFF switch Connect the supplied power adapter to this jack.
Page 6
Quick Start Guide Connecting Your Broadband Router 6500 6500W 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (WAN) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit. (For 6500W only: the WLAN LED will be lit steadily).
Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties.
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties.
Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->...
Page 10
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.
Page 11
Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router Configuring Your Broadband VPN Firewall Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device Open the web browser, enter...
Page 12
Quick Start Guide PPPoE III. Fixed IP PPTP Client Click Apply button and then click the Save Config button to save all of the configuration parameters to Flash. The router will reboot automatically.
Page 13
Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router Connecting to the Router To see if this router is visible on the local network, go to Start / Run. In the Run dialog box, type “Ping 192.168.1.254” and press A command prompt window will pop out.
Need help?
Do you have a question about the BIPAC-6500 and is the answer not in the manual?
Questions and answers