Resetting To The Default Setting - Omron BP652 Instruction Manual

SETTING THE ADVANCED POSITIONING SENSOR (APS)
on1: The buzzer sounds only when the monitor is in proper position.
on2: The buzzer sounds a series of two short blips if your wrist is too far away from
the measuring position, and beeps when your wrist is in the proper position.
oFF: The buzzer will not sound.
on: The buzzer sounds when pressing any buttons.
oFF: The buzzer will not sound.

RESETTING TO THE DEFAULT SETTING

To reset to the default setting, press and hold the SET button while in the setting mode,
then press the START/STOP button simultaneously for more than 2 seconds.
17