Overview Of Ps121 Print Server Setup; Ps121 Default Factory Settings - NETGEAR PS121 User Manual

User Manual for the NETGEAR PS121 Mini Print Server

Overview of PS121 Print Server Setup

Before you share a printer with the NETGEAR PS121 Mini Print Server, you should have at least
one computer connected to an Ethernet network and have one unused port on an Ethernet hub,
switch, or router.
Figure 3-1: Network overview
Follow these steps to set up your NETGEAR PS121 Mini Print Server.
First, connect the PS121 to your printer.
1.
Next, install the PS121 software from the NETGEAR PS121 Mini Print Server Resource CD
2.
and set up the PS121 on your network
Finally, configure each computer to print to the PS121 Print Server
3.

PS121 Default Factory Settings

When you first receive your PS121, the default factory settings are shown below. You can restore
these defaults with the Factory Default Restore button on the rear panel as explained in
Restore the Factory Default Settings" on page
Network Setting
Before you begin, gather your existing network settings such as the TCP/IP addresses and
networking protocols in use.
3-2
Default Factory Setting
IP Address Provided Automatically via DHCP for
Initial Setup but Must Be Set to Static
IP for Regular Operation
2-6.
"How to
Setup