Wiring Diagram; Testing Lights - Demco Kar-Kaddy SS KK460SS Operator's Manual

REF.
NO. PART NO. QTY.
1. 11590
2. 11591
3. 01863
Please order replacement parts by PART NO. and DESCRIPTION.
TESTING LIGHTS BEFORE USE
1. Make sure that the WHITE ground wire is connected to the
frame of both the Kar Kaddy and the towing vehicle.
2. With headlights in "ON" position, the tail lights, the light
cluster bar, the license plate light, and the clearance lights
should be lighted.
3. Start engine and have someone depress brake pedal.
Brake lights of tow dolly and towing vehicle should come
"on" and "off" simultaneously with each application.
4. Turn left turn signal on. Left turn light of Kar Kaddy and
towing vehicle should flash simultaneously. If turn signal
light of the trailer function opposite to those of the towing
vehicle, it is probable that the YELLOW (Driver side) and
GREEN (Passenger side) wires have been reversed.
Check the plug connection under the tongue of the Kar
Kaddy to make sure wire colors are not crossed at that
point. If wires are crossed change them to match color for
color.
White
Brown
Yellow
Green
COLOR CODE FOR WIRING HARNESS
WHITE Ground
BROWN Tail Lights, License Plate Lights,
Light Cluster Bar & Clearance Lights
YELLOW Left Turn and Stop
GREEN Right Turn and Stop

Wiring Diagram

1
PARTS LIST
DESCRIPTION
1 Tongue Wiring Harness
1 Main Frame Wiring Harness
1 Rubber Grommet (not shown)
White
Brown
Yellow
Green
WIRING OF THE TOWING VEHICLE
Connect wiring to towing vehicle, keeping in mind the color
code indicated below.
1. Make certain towing vehicle lights are "OFF".
2. Connect YELLOW wire to left turn signal and stop wire in
the left rear of towing vehicle with the wire splicer (01883)
supplied.
3. Connect GREEN wire to the right turn signal and stop
wire.
4. Connect BROWN wire to tail light wire.
5. VERY IMPORTANT
of towing vehicle. This is the common ground, and a clean
metal - to - metal contact must be made.
CAUTION: Many flashers for vehicle turn signals will not
carry the additional load of Kar Kaddy turn signals. If
normal operation does not occur when connected to the
Kar Kaddy, a heavy duty replacement flasher may be
obtained through auto parts outlets.
12
2
- connect WHITE wire to frame body