Advertisement
2. Hanging Keyhole Type Mounting
NOTE: FOR BEST PERFORMANCE, SPOTLIGHT SHOULD BE
POSITIONED SO MOTION SENSOR IS ON TOP AND LIGHT
IS ON BOTTOM.
screws parallel to the ground if mounting on a vertical
surface. Make sure the screws are precise distance from
each other (2-1/8" apart). (see photo)
If using screws only:
Use 1/8" drill bit to drill holes and insert 25 mm screws so
that screw head protrudes 1/8" from surface( the height
of the screw head).
Hang the mounting base
on the inserted screws and
slide mounting base down
so that the track is securely
held by the screws.
First, use included template
to mark the area where the
screws will be inserted.
NOTE: Spotlight can be
rotated 360°, so screws can
be mounted in any position.
We recommend mounting the
7.
If using anchors:
Use 3/16" drill bit to drill
holes and insert anchors.
Drive 25 mm screws into
anchors so that screw
head protrudes 1/8" from
surface (the height of
the screw head) .
1/8"
3.
Advertisement
