Page 1
® IC Pro / IC Elite ASSEMBLY INSTRUCTIONS NS-75...
Page 2
SCHWINN IC BIKE - PACKAGE COMPONENTS LIST Ref. # Description Qty. Frame Handle Bar Seat Slider Assembly with Saddle Front Stabilizer Bar with Wheels and Feet Rear Stabilizer Bar with Feet Water Bottle Cage Small Parts Box Small Part Box Contents Pedals with Toe Clips &...
Page 3
(45). Tighten hardware firmly but do not over tighten as deformation of the stabilizer tube may occur H. At this time make sure that the adjustable feet with lock nuts are screwed fully into the stabilizer. NS-75 IC Pro / IC Elite...
Page 4
H. Using the 3mm hex tool supplied, mount the two water bottle cages (51) to each side of the fork legs. The necessary mounting screws have previously been installed and must be removed from the fork legs prior to securing the water bottle cage. IC Pro / IC Elite...
Page 5
B. With the resistance adjustment knob turned fully in the counter-clockwise position (no brake con- tact with flywheel) it is recommended that you soak the brake pads with Schwinn Fit-Tech Lube. This will extend the life of the brake pads and assure a smooth resistance interface with the fly- wheel.
Page 6
Tech IC PRO ASSEMBLY DRAWING AND REPLACEMENT PARTS Info Dwg# Description Part # FRAME 84958 RIGHT CRANK W/SPOCKET, ISIS M12 80034 B.B. SET, OVERDRIVE W/BOLTS 68X113L 84990 CHAIN, 1/2x3/32", 112L 95120 RESISTANCE ASSY 84965 BRAKE PADS 92874 SEAT POST 84973...
Page 7
SHROUD - RIGHT 84978 SHROUD - LEFT 84977 MACHINE SCREW M4X.7X10L SS 84961 EMERGENCY BRAKE LEVER 84979 EMERGENCY BRAKE BUSHING 84957 EMERGENCY BRAKE PIVOT PIN 84981 EMERGENCY BRAKE E-CLIP 84960 RUBBER FRAME GUARD 84999 NS-75 IC Pro / IC Elite...
Need help?
Do you have a question about the IC Pro and is the answer not in the manual?
Questions and answers