Using A Chargepak - PURE ONE Flow Owner's Manual

Using an optional ChargePAK
ChargePAK E1 is a rechargeable battery pack (sold separately) for your ONE Flow. ChargePAK
provides the benefits of rechargeable batteries without the inconvenience of removing and
recharging separate batteries. ChargePAK is designed to be left in your unit, so if usually connected
to the mains, your product will always be charged up, ready to go.
Installing a ChargePAK
1. Switch your radio off and disconnect from the mains power supply.
2. Open the battery compartment and push the ChargePAK connector plug into the socket in
the compartment. Line up the ridges on the plug with the slots in the socket. Do not force
the plug.
3. Insert ChargePAK into the battery compartment.
4. Replace the battery door and connect your product to a power supply.
5. ChargePAK will begin charging. When charging your ChargePAK for the first time or after an
extended period of inactivity we recommend that you charge it for around 24 hours to ensure
full battery power. If ChargePAK is flat there may be a slight delay before the battery charging
indicator is displayed.
Notes for use
It is perfectly normal for your ChargePAK to get warm to the touch in use, especially during
charging. Your ChargePAK should give years of trouble-free use under normal circumstances,
however, as for all rechargeable batteries the operating life will gradually reduce with age.
Important: ONE Flow can only be powered with a ChargePAK E1 and is not compatible with any
other batteries, either disposable or rechargeable, or any other ChargePAK model.
+ +
ChargePAK
™
3