Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for PURE TEMPUS-1
Summary of Contents for PURE TEMPUS-1
-
Page 2: Safety Instructions
Trademarks TEMPUS-1, SnoozeHandle, PURE, the PURE logo, PURE Digital, the PURE Digital logo, Imagination Technologies, and the Imagination Technologies logo are trademarks or registered trademarks of Imagination Technologies Limited. All other product names are trademarks of their respective companies. -
Page 3: Table Of Contents
Storing and selecting presets ..........10 Setting alarms ................ 10 Cancelling alarms ..............11 Setting a sleep time ..............11 Recording from your TEMPUS-1 ..........12 Changing the display settings ..........13 Using the connectors .............. 13 Upgrading your software ............15 Hints and tips............16... -
Page 4: Introduction
Unpacking Shown below are the contents of your TEMPUS-1 package. Contact us if any items are missing or damaged. You may also want to peel off the protective film from the LCD display panel and remove the sticker from the Tune knob at this stage. -
Page 5: Overview Diagrams
Autotune button provides one-touch tuning Front panel Standby button switches between standby mode and power on Sleep button sets TEMPUS-1 to enter standby in 15, 30, 45, 60 or 90 minutes Info button changes the information shown on the display... -
Page 6: Quick Start
Set the volume control to low and push the Standby button to switch the unit on. The LCD lights up and the display shows ‘PURE TEMPUS-1’ and a progress bar on the bottom line indicates the progress of an autotune to find the stations available in your area. -
Page 7: Using Your Tempus-1
Tuning TEMPUS-1 is very simple. When you first switch on it automatically finds all the stations available in your area. You may want to re-tune if you move your TEMPUS-1 to a different room or if you want to receive a new multiplex. Multiplexes or ensembles are groups of stations owned and broadcast by a multiplex operator. -
Page 8: Changing Stations
Changing stations You change stations using the Tune knob. If you have assigned stations to presets you can also select them by pushing the relevant numbered button (1-5) or 1. The current station is shown at the top of the screen. Turn the Tune knob until you see the station you want to listen to on the bottom of the screen. -
Page 9: Changing The Information Displayed
The default mode, displays scrolling text messages which accompany the audio, when broadcast. Clock Displays a full screen clock with time obtained from the current multiplex. If your TEMPUS-1 has been unplugged from the mains there may be a slight delay before the time appears when you switch it on. -
Page 10: Storing And Selecting Presets
( Setting alarms TEMPUS-1 has two alarms which switch TEMPUS-1 on (if in standby mode) and tune to the station you have chosen or sound a tone. To set or change an alarm: 1. Press the Menu button and push the Tune knob to select the Alarm settings option. -
Page 11: Cancelling Alarms
Switch on If it is a tone alarm push the Tune button and TEMPUS-1 will enter its normal ‘on’ state. If it is a radio alarm using any button (other than Standby) will operate the radio as normal and cancel the alarm. -
Page 12: Recording From Your Tempus-1
Recording from your TEMPUS-1 You can record from your TEMPUS-1 using the Stereo Out or Digital Out sockets. You can also set a record timer to automatically switch your unit on and tune to a particular station at a time of your choosing – this may be useful if you have a MiniDisc recorder or similar with a synchro-record facility and you use the Digital Out socket. -
Page 13: Changing The Display Settings
Changing the display standby mode You can choose whether the backlight is on or off when your TEMPUS-1 is in standby mode. If you switch the backlight off in standby mode a touch on the SnoozeHandle will override this and turn the backlight on for a few seconds to display the clock, useful for checking the time in the middle of the night. - Page 14 Screw the aerial plug of your replacement aerial onto the Aerial connector on the rear of TEMPUS-1. Connecting to the power supply Once you have made all other connections, connect the power lead to your TEMPUS-1 and plug the power adapter into a wall outlet.
-
Page 15: Upgrading Your Software
Upgrading your software You can upgrade the software in your TEMPUS-1 using a PC connected to the USB connection on the rear panel. To install an upgrade push the Menu button, turn the Tune knob and push to select Sw upgrade and follow the instructions provided with the software. -
Page 16: Hints And Tips
Hints and tips This section provides information on advanced DAB features and offers advice which may help if you are having problems with your TEMPUS-1. Adjusting the DRC value DRC (Dynamic Range Control) makes the quieter sounds in a broadcast more audible at low volume or in a noisy environment. -
Page 17: Troubleshooting
None of the buttons seem to work If the display is on but no buttons seem to work your TEMPUS-1 may be in standby with backlight switched on. If so, you should see a standby indicator on screen. See page 13 for details. Push standby to switch your unit on. -
Page 18: Improving Reception
Aerial advice Your TEMPUS-1 is supplied with a telescopic DAB aerial. This is an indoor aerial which is designed to give good re cep tion in areas with good to moderate DAB signal strength. In areas with poor DAB coverage or poor signal strength you may want to consider using a loft mounted or external aerial. - Page 19 TV/FM trans mit ter, re cep tion may be no better. The standard TV or FM RF connector cannot be plugged into your TEMPUS-1 directly, you will need to use an RF to F-type adapter.
-
Page 20: Resetting Your Tempus-1
The Hints and tips section of this manual starting on page 16, provides some advice and lists some of the more likely reasons for problems you might have with your TEMPUS-1. If you still have a problem with your unit, either visit our website at www.pure-digital.com or contact us using the details below for the latest support information. -
Page 21: Accessories
Visit the shop section of our website at www.pure-digital.com or call us on 01923 277488 to find out more. Note You can also order an ST-1 speaker directly using the form on your warranty card. -
Page 22: Technical Specifications
Technical specifications General Stereo digital radio (stereo output requires optional auxiliary speaker, headphones or external amplifier) with full Band III reception capability, for reception of all UK DAB broadcasts. Alarm/clock functions Two alarm settings with separate station or tone selection and optional daily, weekday or weekend settings. SnoozeHandle™... - Page 23 Please return your registration card to the following address to validate your warranty. PURE Digital Imagination Technologies Ltd., Imagination House, Home Park Estate, Kings Langley, Herts., WD4 8LZ, UK 01923 270188 sales@pure-digital.com 01923 277488 sales support@pure-digital.com 01923 277477 support & service www.pure-digital.com...
Need help?
Do you have a question about the TEMPUS-1 and is the answer not in the manual?
Questions and answers
how to UPGRADE FRAMEWORK (RevA)
To upgrade the software for the PURE TEMPUS-1:
1. Check the manufacturer's website for available software upgrades and installation instructions.
2. View the current software version before upgrading by pressing the Menu button and selecting the "Sw version" option.
3. Follow the provided installation instructions carefully.
4. If experiencing issues, try:
- Removing other USB devices to ensure only the radio is connected.
- Using a surge-protected powered USB hub.
- Using a shorter, high-quality USB cable.
- Disabling antivirus software if necessary.
If problems persist, contact Technical Support.
This answer is automatically generated
@Mr. Anderson
In my cash, non of keys is work to find out my original software and I have a window 7 pro. On my desk top!! I reed somewhere, W.7, is not any more supporting.?... by windows, is it tru ? Any others options... Mr anderson ?