DO NOT plug the UPS into an outlet that is not grounded. If you need to de-energize this equipment, turn off and unplug the UPS. CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems does not sell products for life support or medical applications. DO NOT use in any circumstance that would affect the operation or safety of any life support equipment, with any medical applications, or patient care.
BASIC OPERATION DESCRIPTION ① Power On/Off Switch Press the power switch to turn the UPS ON or OFF. ② LED Indicators Three LED indicators include Using AC, Using Battery, and Fault. Refer to “Definitions for Illuminated LED Indicators” section for details. ③...
Reduce Energy Cost with GreenPower UPS Technology CyberPower’s goal is not only to provide eco-friendly products but also to bring the best value for consumers. The advanced energy-saving design improves the operating efficiency and eliminates waste energy consumption. As a result, consumers will enjoy significant energy cost savings with the adoption of GreenPower UPS technology.
DEFINITIONS FOR ILLUMINATED LED INDICATORS Icon Name Alarm Condition Using AC Normal Utility Failure – The UPS is providing Beep twice every 30 power to battery power-supplied outlets seconds from its battery. Using Battery Utility Failure – The UPS is providing Rapid beeping every battery power.
TECHNICAL SPECIFICATIONS Model DX400E-DE DX600E-DE DX800E-DE Capacity (VA) 400VA 600VA 800VA Capacity (Watts) 240W 360W 480W Input Input Voltage Range 192-263Vac Frequency Range 47~63Hz (Auto Sensing) Output On Battery Output Simulated Sine Wave at 230Vac +/-7% Voltage On Battery Output...
Need help?
Do you have a question about the DX400E-DE and is the answer not in the manual?
Questions and answers