Data Copy By The Front Usb Port; Usb One Touch Copy - QNAP Turbo NAS User Manual

3.6.2

USB One Touch Copy

You can configure the bahaviour of the USB one touch copy button on this page.
The following three functions are available:
Copy from the front USB storage to a directory of the internal drive of the NAS.

Copy to the front USB storage from a directory of the internal drive of the NAS.

Disable the one touch copy button


Data Copy by the Front USB Port

The NAS supports instant data backup from the external USB device to the NAS or
the other way round by the front one touch copy button. To use this function,
follow the steps below:
1. Make sure a hard drive is installed and formatted on the NAS. The default
network share Qusb/ Usb has been created.
2. Turn on the NAS.
3. Configure the behavior of the Copy button on "Backup" > "USB one touch copy"
page.
4. Connect the USB device, e.g. digital camera or flash, to the front USB port of the
NAS.
5. Press the Copy button once. The data will be copied according to your settings
on the NAS.
Note: Incremental backup is used for this feature. After the first time data backup,
the NAS only copies the changed files since the last backup.
144