Extra Rinse; Time Saver; Rinse Hold; Settings - Hotpoint Aquarius WF250 Instructions For Installation And Use Manual

STEP 6
Button Selection:
Reduce Creases
Reduces wash action and spin speed, meaning less ironing for
delicate clothes.
● This option is available with programmes C, E, G, H plus
Rinse and Spin.
Mini Load...
(Models WF445,WF440,WF430,WF250,WF225 and WF220 only)
For washing a smaller load.
In addition to reducing actual washing time, this option will
reduce water and energy consumption by up to 50%.
Note: You can reduce the amount of detergent you use with this
wash.
● This is not available with programmes A, C, F, J, K, L, M or Spin
only.

Extra Rinse

For large wash loads and items for young children or people
with sensitive skin.
This option adds a rinse.
● This is not available with programmes A, J, K, L, M or Spin
only.
Variable Spin Speed
● Only available on models:
WF445,WF440,WF430, WF240,WF215 and WF210.
Use this control to reduce the programme spin
speed only.
If you leave this dial in the maximum position,
the spin speed will be the maximum which is
appropriate for whatever wash programme you
have chosen.
When the programme has finished, return the
dial to the original setting.
WARNINGS:
● DO NOT allow ● DO NOT overload
children to play the appliance!
with the appliance It may damage
or tamper with the the laundry and
controls. reduce the
quality of the
wash.
To select an option, press the button and you will see a light come on alongside the button.
Press again to cancel, and the light will go out.
● If the selected option is not available with your chosen programme, the corresponding light will flash
briefly.
● During the wash
cycle, remember
that the door
glass may
become hot to
the touch.
Options

Time Saver

Saves up to a third on the programme time.
● This is available with programmes B, D, G and H only.

Rinse Hold

Clothes will be held in the final rinse water, keeping them fresh
until you are ready to complete the programme.
Complete the final spin by pressing the Rinse Hold button when
the light is flashing.
● This is not available with programmes A,E,J,L,M or Spin only.
Energy Save...
(Models WF240,WF215,WF210 and WF000 only)
This option reduces the wash temperature by 5˚C.
● This option is available with programmes B, C, D, E and G.
Variable Temperature
● Only available on models:
WF445,WF440,WF430,WF250,WF225 and WF220.
Use this control to reduce the wash
temperature only.
If you leave this dial in the maximum position
(95), the actual wash temperature will be the
maximum which is appropriate for the wash
programme you have chosen.
When the programme has finished return the
dial to the original setting.
● DO NOT open the ● DO NOT try to
dispenser drawer
during any
programme.
● If you stop a programme
open the door part way through a wash
when the 'Door or there is a power cut,
Locked' indicator take care when opening
light is on. the door, the machine
may contain hot water.