Chapter 6 Cable Connection
>
6.7 Power Cord Connection
6.7.1
With No AC Outlet Box
The following explains how to connect the power cords when no AC outlet boxes are installed.
Two power cords (4m) are provided for each enclosure.
IMPORTANT
Procedure
1
1-1
1-2
P3AM-3042-06ENZ0
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
To help with power cord management and prevent incorrect connections,
attach labels to the power cords and make a note of connection origins and
destinations.
Connect the power cords to the ETERNUS DX60/DX80/DX90.
Each enclosure has two power supply units (PSU#0 and PSU#1).
IMPORTANT
The power cords must be connected to the inlets of both power
supply units.
Connect the power cord plugs to the power inlets of the Power Supply Units.
PSU#0
Power cord plug
Attach the release tie to the plug of the power outlet for the power plug not to be
unplugged.
Release tie
PSU#1
Inlet
124
Copyright 2010 FUJITSU LIMITED