Understanding power management
Power management is invoked when the computer goes to stand-by mode. The
monitor states are described below.
For optimal performance, unplug the USB cable to switch off your monitor at the end
of each working day, or whenever you expect to leave it unused for long periods during
the day.
Table2-1.Power indicator
State
On
Saving
Off
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
Apply water or liquid directly to your monitor.
●
Use solvents or abrasives.
●
Use flammable cleaning materials to clean your monitor or any other electrical
●
equipment.
Touch the screen area of your monitor with sharp or abrasive items. This type of
●
contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This
●
may harm the coating of the screen area.
Do:
Lightly dampen a soft cloth with water and use this to gently wipe the covers
●
and the screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.
●
2-4
LT1423pwC Wide Touch Monitor User's Guide
Power Indicator
Sreen
Green
Normal
Green
Black
Off
Black