Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hotpoint HS 63 X
Summary of Contents for Hotpoint HS 63 X
- Page 1 Instructions Hood Morley Way, Peterborough, PE2 9JB, England www.hotpoint.co.uk...
-
Page 2: Table Of Contents
Instructions for use English HS 63 X HS 73 X HS 93 X HSD 93I Contents Installation, 2-3 Assembly Technical information, 4 Electrical connection Power cable Technical data Description, 5 Filtering version Ducting version Operation, 6 Controls Maintenance,7 Cleaning the hood Cleaning the grease filters Replacing the charcoal filter Replacing the lamps... -
Page 3: Installation
Installation Assembly Before proceeding with the assembly operations, remove the grease filters so that the hood is easier to handle (for the instructions see the paragraph “Cleaning the grease filters” in the chapter on “Maintenance”). Fixing to the wall 1) Draw a line on the wall along the vertical axis of the hob. - Page 4 3) Ducting version: a) Connect the air vent of the hood to the air vent hole using a flexible hose of 15 cm diameter. Lock the flexible hose with hose clamps (hose and clamps not provided). b) Make the electrical connection of the hood by means of the power cable (refer to the paragraph “Electrical connection”).
-
Page 5: Technical Information
600 m 1773 cm letter L or coloured red. For hoods in insulation class 1 (mod.HS63X): – terminal of a three-pin plug. For hoods in insulation class 1 (Mod. HS73X- HS93X-HSD93I): – the wire which is coloured green and yellow must be connected to the terminal... -
Page 6: Description
Description The hood may be in the filtering or ducting version. Decide from the outset which type is to be installed. For better efficiency, we recommend installing the hood in the ducting version (if possible). Filtering version The hood aspirates air from the kitchen impregnated with fumes and smells, purifies it through the grease filters and the charcoal filter, and then circulates clean air back into the room. -
Page 7: Operation
Operation Controls LIGHTING Light button Turns the lights on/off. Motor button Activates/deactivates the motor. The motor is activated at the last speed set. Speed decrease button Repeatedly pressing the button will reduce the motor speed until reaching the minimum speed. MOTOR DECREASE INCREASE... -
Page 8: Maintenance,7
Maintenance Always switch off the electricity supply before carrying out any cleaning or servicing operations on the appliance. To avoid possible risks of fire always comply with the indicated instructions when cleaning grease filters and when removing grease deposits from the appliance. -
Page 9: Precautions And Tips
If the instructions for installation for the hob specify a greater distance, this has to be taken into account. The hoods in insulation class 2 (model HS63X) do not need to be connected to earth. The hoods in insulation class 1 (Mod. HS73X- HS93X-HSD93I): must be connected to earth.
Need help?
Do you have a question about the HS 63 X and is the answer not in the manual?
Questions and answers