Hitachi S-3000W Operating Instructions Manual page 74

Function menu screen
4-4 Knee/clip sub-menu
128
KNEE POINT
128 0
KNEE SLOPE
128 0
WHITE CLIP
INITIALIZE
4-5 White shading sub-menu
Corrects vertical white shading due to the lens.
OFF ON
EXTENDER
AUTO SETUP
128
MANU R ADJ
128
G ADJ
128
B ADJ
INITIALIZE
4-6 Flare sub-menu
128
R FLARE
128
G FLARE
128
B FLARE
INITIALIZE
0 127
+10 127
+32 127
On is indicated when using a lens provided with an extender
(indication only).
White shading is set respectively for extender on and off.
Automatic white shading adjustment. Start by adjusting the green
channel shading with MANU G ADJ.
Next, adjust the auto white by pushing the
Then, adjust the auto white by pushing the
0 127
Use when adjusting white shading manually.
0 127
0 127
Simultaneously press the
Shading sub-menu items to values shown in rectangles.
0 127
Adjust red signal flare correction.
0 127
Adjust green signal flare correction.
0 127
Adjust blue signal flare correction.
Simultaneously press the
menu items to values shown in rectangles.
Sets the level where knee function begins operating.
Sets knee response slope.
Sets the white clip level.
Simultaneously press the
Knee/clip sub-menu items to values shown in rectangles.
63
buttons to initialize
button for 1 second.
button for 1 second.
buttons to initialize White
buttons to initialize Flare sub-