Installing Three Sli-Ready Graphics Cards - Asus Z97-WS User Manual

4. Align and firmly insert the SLI bridge connector to the goldfingers on each graphics
card. Ensure that the connector is firmly in place.
5. Connect two independent auxiliary power sources from the power supply to the two
graphics cards separately.
6. Connect a VGA or a DVI cable to the graphics card.
Goldfingers
6.2.3

Installing three SLI-ready graphics cards

Refer to the documentation that came with your graphics card package to install the device
drivers.
1. Prepare three SLI-ready graphics cards.
2. Insert the three graphics cards into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 1 in this user manual
for locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
6-8
SLI bridge
Chapter 6: Multiple GPU support