Resetting The Dome And Camera Lens; Rebooting The Dome - Honeywell EQUIP Series Installation And Configuration Manual

System Administration and Equipment Handling

Resetting the Dome and Camera Lens

Rebooting the Dome

108
Resetting the dome is the same as cycling power to the dome. The dome
configuration remains unchanged. Resetting the lens reverts to the default
zoom, focus, and iris settings.
To reset the dome:
1. From the OSD main menu, press 4 to select Diagnostic Options.
2. Press 7 to select Scan and Dome Reset.
To reset the camera lens:
1. Click the Live View tab.
2. In the PTZ Settings panel, in the Preset Details box, type 98, and then
click Goto.
To reboot the dome:
1. Press ESC four times.
The dome reboots and you are logged off the ACUIX™ IP web client
application.
2. Log on to ACUIX™ IP web client application.