Iclebo Arte YCR-M05 User Manual
  1. Manuals
  2. Brands
  3. Iclebo Manuals
  4. Vacuum Cleaner
  5. YCR-M05
  6. User manual

Iclebo Arte YCR-M05 User Manual

Hide thumbs Also See for Arte YCR-M05:
Table of Contents

Advertisement

Quick Links

See also: Quick Manual
Model Name
iClebo Arte (YCR-M05-10)
Power
Charging energy Consumption
Main body energy consumption
Battery
Lithium ion (Li-ion)
Diameter
Height
Weight
Speed
Filter
Antibacterial filter
Sensor
IR,PSD,Gyro, Encoder, bumping
Charging Time
Usage Time
140 min. (based on normal floor)
Noise
※ Cleaners from YUJIN Robots, iclebo series is designed to comply with Energy star standard,
which is the new energy consumption efficiency certification system in Europe,
and it achieves the highest energy efficiency level in the industry.
MADE IN KOREA
©2013 SYNET Electronics Inc.
220 Technology Drive, Suite 220, Irvine, CA 92618, USA.
support@iCleboUSA.com
Toll-Free: 888.372.8990
www.iCleboUSA.com
One-Year Limited Warranty.
Specifications and features are subjected to change without notice.
100~240 V
0.9 W
22 W
13.8 in
3.5 in
6.17 lbs
250 mm/s
100 min.
55 db
YCR-M05

User Guide

Vacuum Cleaning Robot iClebo Arte
■Please be sure to read the Safety Precautions before use.
www.i C l e boUSA.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Arte YCR-M05 and is the answer not in the manual?

Questions and answers

Related Manuals for Iclebo Arte YCR-M05

Summary of Contents for Iclebo Arte YCR-M05

  • Page 1: User Guide

    Noise 55 db ※ Cleaners from YUJIN Robots, iclebo series is designed to comply with Energy star standard, which is the new energy consumption efficiency certification system in Europe, and it achieves the highest energy efficiency level in the industry.

  • Page 2: Safety Precautions

    • Random Mode • Spot Mode • Max (Auto + Random) mode • Mopping Mode / Door sill adjust Timer cleaning Iclebo Care & Maintenance Emptying dust bin and servicing the antibacterial filter Cleaning Side Brush Cleaning Sensor Cleaning Main Brush...
  • Page 3 This content is for the user’s safety and to prevent any property loss. Read the below carefully and use it with care. Users must be aware of necessary details for using this product. Prohibition Users must follow the instructions to avoid serious injury or death.
  • Page 4 Precautions before using - Do not touch the power cord or the charger with wet hands. It may cause electric shock. Prohibition - Arrange any cables or wires before use to avoid them being wrapped or caught by the robot Warning It may cause re or electric shock due to damaged cable.
  • Page 5 Precautions while using - In case the robot cleaner has unusual sound, smell or smoke turn o the robot immediately and place well away from ammable objects. Warning It may cause electric shock or re. - Do not use the robot cleaner on the table or any place high. It may damage the product.
  • Page 6 Components Robot cleaner Charging Cleaning brush Remote control station (batteries included) YCR -M0 5-02 Qu ick Gu ide Vacuu m Clean ing Robo t Quick Guide Adapter Antibacterial filter Mop plate Side-brush(R) Side-brush(L) Area boundary tape Ultra microfiber Double sided (virtual wall) wet mop tape...

  • Page 7: Charging Station

    ● Charging station ● Dust bin Filter Antibacterial /blackout filter Filter case Charging display Dust bin Infrared generator Blade non-slip Charging terminal ● Remote control ● Display screen Start/stop Power button Battery button Set-time status Time setting status Timer button button Door sill height Clock/...
  • Page 8 For effective cleaning Please follow the instructions below for high cleaning e ciency. - Empty the dust bin a er each use of the robot cleaner. - Use Magnetic strip to con ne the robot to an area or by closing the door. (Refer to P.10 How to install entrance prevention tape) - Set the magnetic strip not too far apart from the oor.
  • Page 9 Check list before using Assemble side-brush 1. A er ipping over the robotic vacuum cleaner, identify the positions of the le and right side brushes. 2. Match the L side brush to the L marked part in the direction of the groove, then push in rmly. 3.
  • Page 10 Check list before cleaning Install base (charging) station 1. Open the cover of the backside of the charging station, and install the adapter with connected power plug as shown in gure 2 above. 2. Completely connect the charging jack of the adapter to the jack inside the charging station.
  • Page 11 Current Time setting ※ Make sure to set time for timer cleaning. 1. Press the Clock bu on on the remote control. Time display of the display screen will ash. 2. Set “hour” with (+)(-) bu on of the remote control, and press Enter bu on.
  • Page 12 3. Use MODE to select AUTO or NDOM. During the basic cleaning, robot performs the (During the se ing of NDOM mode, set cleaning in vision mapping method, and the robot cleaning time using +,- bu on: Default is 60 min.) decides when to nish the cleaning.
  • Page 13 ※ The default climbing height of obstacles for the robotic vacuum cleaner is up to about 0.79 in. Cleaning ※ If you wish to set the robot not to go over obstacles over 0.2 in or mode doorsill, etc., click CLIMB button to turn off CLIMB mode! : Please turn off CLIMB mode if you wish to protect carpet, etc.
  • Page 15 Cleaning Main brush 4. Separate the brush cover then remove the main brush. Furrow 6. A er cleaning, put the pyramid-shaped bump on the side of the main brush to the pyramid-shaped recess on the drive cam. (Insert rmly to ensure there is No gap between the brush and the cam.) Cleaning Front Wheel...
  • Page 16 Storage 1. If the vacuum cleaning robot is not used for a long period of time, turn o the power switch on the side of the main body. 2. Place it where it is cool and ventilated. Battery Caution & Disposal Information 1.
  • Page 17 Below is the explanation about the most occurred ‘breakdowns’ when using this product. If you can’t solve the problem with information below, please call your Customer service center. Problem C a u s e S o l u t i o n See <Product control &...
  • Page 18 Dust bin is full or lter is Empty and clean the dust bin. dirty. Noise of the See <Product control & maintenance> Main brush is dirty. robot cleaner is (page 13) and clean the lter. Main brush is dirty or hairs ge ing worse.
  • Page 19 A separate license is required for each additional use and individual CAL, NUCLEAR, MEDICAL, LIFE SAVING OR LIFE SUSTAINING SYSTEMS, OR user in all other cases. If you are an entity, iCLEBO grants you the right to designate FOR ANY OTHER APPLICA-TION IN WHICH THE USE OF THE ICLEBO...
  • Page 20 Always remove the battery and disconnect ICLEBO from the charger before cleaning. USE: iCLEBO is an indoor device only, do not use outdoors. iCLEBO is not a toy. Do not use iCLEBO on wet surfaces or where contact with or immersion in water is a possible. Do not sit or stand on this device.

This manual is also suitable for:

Arte ycr-m05-10

Table of Contents

Save PDF