NAD VISO FIVE Owner's Manual page 11

10 LOAD SW: For future software program updates, use this button
in combination with RS232 to upgrade the VISO FIVE. Owners who
register their VISO FIVE in our international website www.nadelectronics.
com will be advised of updates. Your custom installer or dealer can
assist you in the proper upgrade and setup of your VISO FIVE.
11 5.1 CH INPUT: Connect to the corresponding analog audio outputs
of a multichannel source component such as a DVD-Audio or external
multichannel decoder (disc copy protected formats only allow analog
signal transfer). The signals present at these jacks will be heard by rotating
the INPUT SELECTOR knob to select "Ext 5.1" as your source input.
There is no bass-management or other processing (other than master-
volume control) available to this 5.1 Channel Input. While the multi-
channel audio outputs of a DVD-Video player can be connected to
these jacks, using the VISO FIVE's own Dolby Digital and DTS decoding
and digital-analog converters via a digital connection will usually
produce superior results.
12 HDMI OUT: Connect the HDMI OUT to a HDTV or projector with
HDMI input.
WARNING
Before connecting and disconnecting the HDMI cable, both the
VISO FIVE and the ancillary source must be powered OFF and unplugged
from the AC outlet. Failure to observe this practice may cause permanent
damage to the equipment connected via the HDMI socket.
IMPORTANT NOTICE
When playing DTS (or Dolby Digital) material, ensure that the volume of
your HDMI equipped TV is muted. There may be a rushing noise heard if
your TV is not capable of decoding the DTS (or Dolby Digital) Bitstream;
most TVs do not have this capability.
13 MP DOCK: The VISO FIVE is equipped with a data port in the rear panel
where an optional "NAD IPD 1 Dock with iPod" (NAD IPD 1) can be
plugged in. Connect the "MP DOCK (DATA PORT)" jack of the VISO FIVE
to the corresponding "DATA PORT" socket of the optional NAD IPD 1.
14 XM MODULE INPUT (North America version only): Connect XM
radio cable to this socket. Follow the instructions that came with your
XM radio. With XM radio, there are more than 100 channels of music,
news, sports, comedy, talk and entertainment. You will find that the
coverage is continent wide. The music quality is digital with many
commercial-free music channels.
NOTE
• Questions? Visit www.xmradio.com
Listeners can subscribe by visiting XM on the Web at www.xmradio.com
or by calling (at the time of printing this manual) XM's Listener Care at
(800) 853 9696. Be ready with your Radio ID that can be found on the
radio by selecting Channel 0.
DAB MODULE INPUT (Europe version only): Plug-in the other end
of the Mini-Din connector from the NAD DAB Adaptor DB 1 module
output port into this socket. The VISO FIVE is compatible only with NAD
DAB Adaptor DB 1 so check with your NAD dealer for this module's
availability. With DAB, you can receive CD-like quality programs without
any annoying interference and signal distortion.
IDENTIFICATION OF CONTROLS
15 COAXIAL IN, OPTICAL IN: Connect to the optical or coaxial S/PDIF-
format digital output of sources such as CD or DVD players, HDTV or
satellite tuners and other components.
OPTICAL OUT: Connect the optical digital OUT port to the
corresponding S/PDIF digital input of a compatible device such as CD
recorders, receivers, computer soundcard or other digital processors.
16 FM, AM ANTENNA INPUT: The supplied wire "dipole" FM antenna will
connect to the FM connector using the supplied "balun" adapter. It will
usually work best when mounted on a vertical surface such as a wall,
with arms fully outstretched forming a horizontal "T" perpendicular to
the origin point of the signal.
Connect the supplied AM loop antenna to these terminals. If an external
AM antenna is used, make connections to the AM and GND terminals
in accordance with the instructions supplied with the antenna. See also
section about "LISTENING TO AM/FM RADIO".
17 IEC AC MAINS (POWER) INPUT: The VISO FIVE comes supplied with
a separate AC Mains cable. Before connecting the cable to a live wall
socket ensure that it is firmly connected to the VISO FIVE's AC Mains
input socket first. Always disconnect the AC Mains cable plug from the
live wall socket first, before disconnecting the cable from the VISO FIVE's
Mains input socket.
18 SWITCHED AC OUTLET: This convenience outlet can supply switched
power to another component or accessory. It is powered ON and OFF
by the front panel POWER SWITCH or by the HTR 7's ON and OFF keys.
REAR PANEL
11