Samsung SCU-2370 User Manual page 55

Setting the Power on Resume & MD/TD Dwell Time
Power On Resume :
This is useful when the power is disconnected and
reconnected due to power failures or other power interruptions.
If the camera was performing a sequence action prior to a
power disconnection, the camera automatically resumes the
action when the power is reconnected.
MD Dwell Time (SCU-2370/VAC) :
When Motion Detection under the Preset Edit menu is
selected, MD Dwell Time performs the Group function.
While the camera is performing a sequence action,
if motion is detected from a selected preset location, the
camera pauses the sequence action operation and starts
monitoring the location instead for a duration that is set under
the MD Dwell Time menu.
If the motion is no longer detectable or the duration expires, the
camera aborts the monitoring operation and then resumes the
sequence action.
TD Dwell Time (SCU-9080) :
This function is provided for using the Thermal Detection
function with the Preset Edit command and performing a
Group action.
During performing a sequence action, it monitors on the current
preset position for the time specifi ed by TD Dwell Time if a
thermal detection event occurs on a preset position.
If thermal detection expires with no thermal activity and
the dwell time ends, resumes and continues the sequence
operation.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
PTZ Trace
Auto Run
Power On Resume
MD Dwell Time
<SCU-2370/VAC>
Sequence Setting
Preset
Swing SEQ
Group SEQ
PTZ Trace
Auto Run
Power On Resume
TD Dwell Time
<SCU-9080>
English - 55
ON
OFF
ON
OFF