palmOne Zire 72 User Manual page 430

CHAPTER 18
Tip
The default Timeout
setting is 45 seconds. It
can be any number
greater than 0 seconds;
however, if you set the
number too low, your
connection attempt may
time out before you make
a connection with the
e-mail service provider.
Zire™ 72 Handheld
Sending and Receiving E-mail Messages
Cont'd. Auto-Disconnect Automatically disconnects your remote connections after
each command. Each command you perform initiates a new call to your ISP .
This setting is not recommended if you plan to perform multiple e-mail
transactions in a short amount of time.
Disconnect on Exit Disconnects from the network only after you leave the
VersaMail application. This feature is an alternative to Auto-Disconnect. This
option keeps your connection active while you perform multiple transactions in
the VersaMail application, but automatically disconnects when you move on to
a different application on your handheld. If this option is not selected, you must
manually disconnect from your ISP .
Modem Wait Displays the number of seconds that the modem uses to
initialize itself. If you have a modem, tap and enter a number of seconds for the
wait. The typical setting for a wireless modem is 3, and the typical setting for
most normal modems is 0.
Done
408