Test Mode Of Cd Player; Md Mechanism Error Message - Kenwood RXD-M31MD Service Manual

6-4 Test mode of CD player

6-4-1 Main unit
(1) Setting of the test mode
While pressing the [CD PLAY] key, plug the AC
power cord into an AC outlet.
(2) Canceling of the test mode.
Unplug the AC power cord from AC power outlet.
(3) Operation
KEY DISPLAY OPERATION
[ CD PLAY] POWER ON, SEL CD
CD 5 01
+AC Mecha. initialization
STOP CD 5 01 STOP
CD 5 05
PLAY/PAUSE
PLAY MARK
05 MODE
PAUSE
ON ‰
óï
PLAY
CD 5 03
03 MODE
(Cyclically
PAUSE MARK
(TRACKING SERVO OFF)
changed) ON 8
Indication
: Adjustment value/Mean
value (stop mode only)/HEX
DOT TNO SEC.
SKIP DOWN CD 5
section section section
TB/FB TB value FB value
TG/FG TG value FG value
FE/RF FE value RF value
TE/VC TE value VC value
Read TOC î play
SKIP UP CD 5 06

7. MD mechanism error message

DISPLAY DESCRIPTION
BLANK DISC Non Recorded disc
CAN'T COPY Inhibit to record by SCMS
CAN'T EDIT Inhibit to edit by MD standard
CAN'T REC Inhibit to record by disc damage(10 or more
defects/recordable cluster is 0)
DISC ERROR** OR : UTOC read error or FTNO>LTNO
(edit/record) permit ALL ERASE only
DO : Start address TNO>endless TNO
(playback) handle poor TNO as 1SG
(edit/record) permit ALL ERASE only
C0 : Write poor data in UTOC0
C1 : Write poor data in UTOC1
C2 : Write poor data in UTOC2
C4 : Write poor data in UTOC4
(play back) playback even if address
roof(C0)
(edit/record) permit ALL ERASE only
DISC FULL No recordable area
MECH ERR** 10-13 : head poor down
20-23 : head poor up
no disc No disc in the unit
NO TRACKS Disc recorded title only
NOT AUDIO Disc recorded audio signal.
PLAY ONLY Record to music disc
PROTECTED Record disc inhibited to record
READING In mode of reading TOC or UTOC
SRCH ERR** 30 : Search time over in playback, FF or FB
31 : Search time over in REC-PAUSE
32 : Search time over in record
TEMP OVER High temperature
TITLE FULL Input over letter of title
UNIT ERROR Hardware damage
UTOC W ERR Error of writing to UTOC
WRITING In writing to UTOC