TracRac G2 User Manual

TracRac G2
®
The ulTimaTe sliding racK sysTem
TracRac G2 is engineered to maximize the functionality of your truck. You can
®
slide the racks into any position along the base rails for different size loads and
add accessories for extra capacity, storage configuration or tie-down points.
TracRac ® G2 conforms to your needs.
Complete System: 21000 Series Base Rails &
42000 Series Overhead Racks
Aerodynamic and Quiet
– features wind deflectors
to reduce noise
Damage Free Installation
– no drilling into truck bed
System Features
• 2 Black Anodized Aluminum Base Rails
Base Rails Includes
• Mounting Hardware
• Front and Rear Sliding Racks
Over Head Racks Includes • 4 Sliding Aluminum Crossbar Tie-downs
• 4 Aluminum ARC Side Cleats
Load Capacity • 1250 lbs.* *When evenly distributed across both racks and installed correctly.
Weight • 80 lbs.
• Dual Stage Power Coat
Finish and Material
• 100% Rust Free Aluminum
4 TracRac | Engineered to Deliver
®
Aluminum Tie-downs Adjust
Across Full Width of Truck
– accommodate multi-size loads
Routed Entry Holes
on Top and Bottom of
Crossbar to Allow Easy
Accessory Entry
Black Anodized Aluminum Expansion Block Stake
Pocket Mounts
Base Rails
Aluminum Crossbar
Endcaps – assist
load retention
Aluminum ARC Side Cleats
– provide additional tie-down points
Technical Specifications
– Core Components: 6063 T-6 Aluminum
Materials
– Hardware: 304/18-8 SS or Coated Steel Meeting GM Specification GMW4700
– Core Components: Dual Stage Electrostatic Powder Coating 2.0-4.0 mils thickness Meeting 2000 hr Salt Spray Testing per GM
Coatings Specification GM4350 and Chrysler MS-PE-16-2
– Base Rails: Black Soft Coat Anodizing
Performance Characteristics
– Load Rated for 1,250 lbs. Evenly Distributed tested on Cyclical Load Tester at 135 Degrees with 2X safety Factor to 20,000 Cycles
Cross Bar T-Slot Dimensions
– Slot Opening Width: .393" – Slot Base Width: .720" – Slot Height: .275"
– Bullet Shaped Crossbars - Aerodynamics
– Air Foil Trip Strip at Front of Crossbar – Reduces Noise
Physical Features
– Tri-Directional Aluminum ARC Cleat Located on Outside of Uprights
– Unique Saddle Base Slider Construction Shape Increase Strength and Rigidity – Eliminates Need for Additional Bracing
– Rubber Expansion Block Stake Pocket Mounts with Aluminum Compression Nuts
Sliding Racks Adjust Along
Full Length of Bed to Carry
Different Loads and Can
Easily Be Removed When
Needed
Internal Web Structure
on Crossbar for Increased
Strength
Utilizes TracRac's Modular
Design Platform – increased
strength and flexibility
TracRac | Engineered to Deliver 5
®