Advertisement
Quick Links
Advertisement
Related Manuals for TracRac TracONE
Summary of Contents for TracRac TracONE
- Page 1 Installation Instructions...
- Page 2 HARDWARE BAG - CLAMPS HARDWARE 01-27015 BAG - UPRIGHT/SADDLE HARDWARE BAG 01-27016 DATE: 01-27043 - PLASTIC TIEDOWNS P/C, UPRIGH BASE Fall River Mass. 01-27013 LF/RR TITLE: 01-27035 ASM, MODULAR UPRIGHT TracONE 01-27014 P/C UPRIGHT BASE RF/LR DESIGN: SCALE: REV: 1:10...
- Page 3 Aluminium Die-Case CrossBar Tiedowns Qty: 2 Tiedowns Toyota Tacoma Mount Kit- These replacement clamps Plastic Loop Tiedowns work with your existing hardware to mount your TracONE into Qty: 2 Tiedowns the Tacoma Deck Rail System. Part # Description 25250 TracBox - Full Size, Crossover, Powder Coated Toolbox...
-
Page 4: Installation Instructions
Installation Instructions These instructions will guide you through the 3 main component assemblies: Upright units Cross bars Clamp units Please reference the drawing below for a general overview. Tool you will need: • 3/16” Allen Key • 7/32” Allen Key •... -
Page 5: Hardware Bag Contents
Hardware Hardware Bag Contents 01-27016 Hardware Bag-1 Upright/Saddle Hardware Item # 12 Item # 13 Item # 14 Item # 15 3/8 - 16 x 1.5” 3/8 - 16 x .625” 3/8 - 16 M6-1 Flat Head Cap Screw Button Head Cap Square Nut Socket Head Cap Qty - 16... - Page 6 Part 1 - Uprights Step 1 1.1 Upright Assembly First take the upright (Item 4) and insert it into a modular saddle (Item 3). Bolt the saddle through the top by using two 3/8”-16 flat head cap screws (Item 12) and tighten using an 7/32”...
-
Page 7: Cross Bars
Part 2 - Cross Bars Step 2 2.1 Crossbar Assembly Figure 2.1 Take the double T-Slot crossbar (Item 1) and insert four square nuts (Item 14) into the bot- tom T-Slot. Reference Figure 2.1, 2.2 & 2.3 Insert a T-bolt (Item 21) through the bottom of the cross bar tie-down (Item 20) and slide the unit into the top track of the crossbar so that both the bolt and the tiedown are locked into... - Page 8 Part 3 - Clamps & Truck Installation Step 4 4.1 Base Clamp Assembly 4.1.2 We recommend that you apply Loc-Tite Take a modular clamp (Item 7) and thread a 3/8”-16 (red) to any thread that is hex head cap screw (Item 18) through the bottom engaged with the clamp.
Need help?
Do you have a question about the TracONE and is the answer not in the manual?
Questions and answers