Samsung 6 Series User Manual page 37

The TV won't turn on.
There is no picture/video.
The remote control does not
work.
The cable/set top box remote
control doesn't turn the TV on
or off, or adjust the volume.
~
This TFT LED panel uses
produce. There may be, however,
impact on the performance
~
To keep your TV in optimum condition,
USB (samsung.com
---+
• Make sure the AC power cord
and the TV.
• Make sure the wall outlet is
• Try pressing the C) button on the TV to make sure the problem
the remote. If the TV turns on, refer to "Remote
below.
• Check the cable connections.
connected to the TV and external devices.
• Set the video outputs of your
Blu-ray etc) to match the TV's input
external device's output is HDMI, it should be
input on the TV.
• Make sure your connected devices are powered
• Be sure to select the correct
• Reboot the connected
the device's power cable.
• Replace the remote control
installed with their poles (+/-)
• Clean the sensor's
• Try pointing the remote directly
• Program the Cable/Set
Cable/Set-Top-Box user manual for the SAMSUNG TV code.
a panel consisting of sub
a few bright or dark
of the product.
upgrade to the latest
Support Downloads).
-+
is securely plugged in to the wall
working.
Remove and reconnect all cables
external devices
connections.
input source
device by unplugging it
batteries. Make sure the batteries are
in the correct direction.
transmission window on the
at the TV from
remote control to operate
pixels which require sophisticated technology to
pixels on the screen. These pixels will have
firmware on the Samsung web site by
outlet
is not
control does not work"
(Cable/Sat Box, DVD,
For example, if an
connected to an HDMI
on.
, and then reconnecting
remote.
5-6 feet away.
the TV. Refer to the
no