Samsung 5 Series User Manual page 27

Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration
connections. Home networks that support DHCP automatically provide the IP address, subnet
gateway, and DNS values your TV needs to access the Internet so you don't have to enter them manually.
If you have a Static IP network, see your user's manual for configuration instructions.
To configure the network connection for a wired network that uses DHCP, follow these
1. Connect your TV to your network as shown in one of the illustrations on page
2. Turn on your TV, and then go to the Network Settings screen
Settings)
3. Select Start.
4. The Network Connection screen appears, and verifies the network connection
has been verified, the "You are connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider." message appears. Network set up is
completed.
~
If your TV cannot acquire network the connection values automatically or if you want to set the
connection manually, select IP Settings on the network connection
and then enter the IP Address, Subnet Mask, Gateway, and DNS Server
~
For more detailed information, refer to "Setting up a Wired Network" in the e-Manual.
Protocol (DHCP) to configure network
15.
. (Menu---+ Network---+ Network
. When the connection
screen. Set IP Mode to Manual,
manually.
mask,
steps: