Department of Motor Vehicles for information. • The battery in the Magellan RoadMate 2200T is rechargeable and should not be removed. In the event it should need to be replaced, please contact Magellan Technical Support. About Charging the Magellan RoadMate 2200T •...
Do not use the adapter if the cord becomes damaged. • Do not attempt to service the Magellan RoadMate 2200T. There are no serviceable parts inside. Replace the Magellan RoadMate 2200T if it is damaged or exposed to excess moisture.
The Magellan RoadMate 2200T must be installed and operated at a distance no closer then 8 inches (20 cm) from the user. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Magellan RoadMate 2200T 1 What the Magellan RoadMate can do for you... 1 Magellan RoadMate Reference Manual 1 Magellan RoadMate 2200T 2 Magellan RoadMate 2200T Right Side View 3 Magellan RoadMate 2200T Left Side View 3 Magellan RoadMate 2200T Screens 4...
Page 7
Magellan RoadMate Enhanced POIs 22 Overview 22 Accessing the Enhanced POI Menu 22 Loading an Enhanced POI file 22 Displaying/Selecting Categories 22 Setting Alarms 22 Setting Alert Parameters 22 Creating a Route Using Enchanced POIs 23 Saving a POI to your Address Book from Enchanced POIs 23...
Page 8
Opening a POI File 32 Creating a New POI FIle 33 Adding Individual POI’s 33 Importing a Data FIle 35 Magellan RoadMate Music Manager 36 Magellan RoadMate Photo Manager 37 Music Player 38 Single Song Play 38 Multiple Song Play 39...
It is not necessary to read this entire document to begin using the Magellan RoadMate. Most users will find that they can use the Magellan RoadMate right out of the box and just refer to this manual on those rare occasions when a little help on a function is needed.
(in the up position) before the Magellan RoadMate can be turned on.] All connections to the Magellan RoadMate are located on the left and right sides of the unit, protected by a rubber covering to keep out moisture. When you need to access the connectors, simply lift the protective cover from the bottom.
Magellan RoadMate 2200T Right Side View Power - Press and hold to turn the Magellan RoadMate on or off. (Note: The reset switch MUST be in the up position.) USB Connection - (under protective cover) Used for connecting to a personal computer to upgrade the firmware.
Magellan RoadMate 2200T Screens Map Screen The Map Screen is the most commonly used screen on the Magellan RoadMate. Whether you are getting directions or just driving around town, the Map screen will give you the peace of mind of knowing where you are.
The Main Menu has two modes; active route and normal. When a route is active the Main Menu provides functions that pertain to the route. With no active route, the Main Menu provides access to functions that are used to create a route. Main Menu - Active Route Magellan RoadMate 2200T Screens...
Page 14
Active Trip Button Functional only when travelling on a multidestination trip. Provides access to tools to modify the trip you are on. Trip Computer Accesses the trip computer feature providing information about the trip that can be saved. Magellan RoadMate 2200T Screens...
When tapped displays the signal strength. Satellite Status screen. Home Button. Save your home address in the Magellan RoadMate 2200T and easily create a trip with your home as the destination. Address Book Button Access addresses saved to the address book.
Accesses the Application Menu for additional applications and system settings. Enhanced POIs Used to access personal POIs created with the Magellan PC Toolkit Trip Planner Used to create a multidestination trip that can be travelled or saved. Trip Computer Accesses the trip computer feature providing information about previous trips that can be saved.
Application Menu Screen From the Application Menu you can select additional applications for your Magellan RoadMate. Preloaded into the Magellan RoadMate is an MP3 player and an image viewer. Additionally, information about your battery life and changing your system settings can be found on the Application Menu.
Creating a route involves selecting a destination and choosing how you would like the route calculated. Once this is done, the Magellan RoadMate will calculate the route using the guidelines you provide and displays the Map screen with information guiding you to your destination.
W. Main from the list of available streets. Creating a route using POIs POIs (points of interest) have been preloaded into the Magellan RoadMate for commonly used categories such as banks, restaurants, gas stations, etc. Following the steps provided you will be able to create a route to any of these destinations.
4. Select a POI from the list of available POIs. 5. Once the POI has been selected, select the routing method you want to use and the Magellan RoadMate will begin calculating the route. Creating Routes...
This function is available whether you are operating on a route or just travelling without a selected destination as long as you are on a freeway. Please note that if you are travelling on a route, selecting this will cancel the route and create a new one. You will then need to redo the route, using Previous Destinations in the address book, to finish the orginal route.
Create a route to the home address 1. From the Main Menu, tap Home. 2. Tap Route. 3. Select the routing method you want to use and the Magellan RoadMate will begin calculating the route home. Using the address book Creating a route to a previous destination 1.
3. Select the desired destination from the list of previous destinations. 4. Tap Edit. 5. (Optional) Edit the name of the address by tapping on top line of the address. 6. (Optional) Tap the Favorite check box to add this address to your list of favorite addresses.
If you do a search, you will be asked to enter the first few characters on the address name. 4. Select the desired address from the list of addresses in your address book. 5. Tap Edit. 6. Tap on the top line to change the name or the bottom line to change the address information.
Select on Map: The Map screen is displayed. Use your finger or stylus to pan the crosshair cursor around the map. When the crosshair cursor is over the point on the map you want, tap on the crosshair cursor. Select Address: Follow the instuctions for selecting an address, either by city, zip code or previous cities.
Page 26
5. Enter the name of the second street. When given the list of streets, select the desired one from the list of available streets. 6. Select the desired route method. Creating Routes...
Using the Trip Planner Overview Normal routes are calculated from your present position to a single destination. It is sometimes beneficial to have a trip that goes to multiple destinations. The Trip Planner gives you the means to create and save multiple destination trips. Creating a multiple destination trip 1.
5. A list of the individual destinations is displayed. Tap on the first destination on the list to activate the trip. 6. Select the routing method to compute the trip. You can also pick which destination to begin the trip on, skipping over destinations prior to it, by tapping on the first destination you want to go to.
Deleting a multiple destination trip 1. From the Main Menu, tap to go to page 2 of the Menu. 2. Select Trip Planner. 3. Select Delete, Rename. 4. Select Delete. 5. Select the Trip to be deleted from the list of saved trips. 6.
Magellan RoadMate Enhanced POIs Overview Personal POIs can be created using the Magellan RoadMate PC Toolkit and loaded into your Magellan RoadMate using an optional SD card. The Enhanced POI option provides a way of loading these POIs into the receiver and can then be used to create a route.
8. Add the POI to your favorites list if desired by checking the Favoitie checkbox. 9. Tap Save. 10. You can now route to this POI by tapping Route or return to the main menu by tapping Cancel. Magellan RoadMate 2200T Enhanced POIs...
Setting User Options Overview Portions of the Magellan RoadMate are customizable to your needs. To access the User Options menu, select Options from page 2 of the Main Menu and select the option you want to change. POI Selection In POI Selection you can select which POI icons will be displayed on the Map screen Check the POI category name to select or deselect it.
Automatic Re-Route: When checked, automatic re-routing is on. Detour Options The Magellan RoadMate detects when you are on a route and you are moving slowly or not moving at all on a freeway. It then provides you with the option of detouring around the problem area.
Simulator Mode This option provides a way to set the Magellan RoadMate into simulation mode. In simulation mode you can create a route and observe the Magellan RoadMate in action as it simulates travelling along the route. Simulation: Check “Propose simulator mode when calculating a route.” to turn the simulator on.
Backup and Restore will save (backup) all of your address, trips, and option settings to an SD card installed in the Magellan RoadMate. You can then upload (restore) this information in the future should you lose the information or accidently clear the addresses.
This will lengthen the usable battery life between battery charging. Power This setting tells the Magellan RoadMate how long it should stay on while there is no noticable activity. (Noticable activity would include button presses and the location of the Magellan RoadMate not changing.)
A battery charge indicator is shown at the bottom of the display. When the Magellan RoadMate is charging, the green bars will sequence from left to right. Remove the power cable and the green lights will display the approximate battery charge.
SD card in your Magellan RoadMate 2200T. Installing the Software 1. Insert the Magellan RoadMate Tools PC Application CD into your PC’s CD drive. 2. The setup application will begin automatically. If it does not, browse your computer’s CD drive and double-click on the setup.exe file.
The Magellan RoadMate POI Manager enables you to transfer custom points of interest files from your computer to your Magellan RoadMate 2200T. Before we add any custom POI’s to the Magellan RoadMate 2200T, you should understand how the POI Manager plots POIs.
2-3 seconds, 10 seconds if not in sleep mode. When the Warning screen appears, insert the small end of the USB cable into the USB port on your Magellan RoadMate 2200T, and the large end into an available USB port on your computer.
Locate the POI files you wish to load. When you have selected a file, the Copy To Unit arrow will turn green. Click on the arrow to copy the file to your Magellan RoadMate 2200T. When you have finished copying files, remove the USB cable from the Magellan RoadMate 2200T.
Page 42
Select your preferred unit or measure (Meters or Feet). The Detection angle sets the range of alert in degrees from the POI. Select Activate alert for this category to enable the alert settings. When you have finished, select Magellan RoadMate POI Manager...
Assign a name to your file and click on Save POI file Save Close the POI File Editor. Select the POI file you just created and click on the transfer button (right arrow) to upload the file to your Magellan RoadMate 2200T. Magellan RoadMate POI Manager...
SD memory card installed in your Magellan RoadMate 2200T. The amount of music you can load depends on the size of the card. Insert the memory card into the memory card slot. Turn on your Magellan RoadMate 2200T by pressing and holding the Power button for approximately 2-3 seconds if in sleep mode.
Magellan RoadMate 2200T. The number of images you can load depends on the size of the card. Insert the memory card into the memory card slot. Turn on your Magellan RoadMate 2200T by pressing and holding the Power button for approximately 2-3 seconds (Ten seconds if the Magellan RoadMate 2200T is not in sleep mode.) When the Warning...
Music Player The Magellan RoadMate 2200T Music Player enables you to play music files in MP3, or WMA format, stored on an optional memory card installed in your Magellan RoadMate 2200T. If you have not already done so, you must install the Magellan RoadMate Tools application and transfer files onto the card using the Magellan RoadMate Music Manager.
Continue adding files to the playlist. When you have finished, select Delete Delete To remove a playlist, select Select the playlist you wish to delete and select A dialog box will appear asking to confirm your selection. Select to delete the playlist. Magellan RoadMate Music Player...
Select the equalizer preset by pressing the button at the top of the screen When you are satisfied with your selection, select . To exit without setting the equalizer, select Help Help Select for descriptions of the Music Player buttons. Magellan RoadMate Music Player...
Photo Viewer The Magellan RoadMate Photo Viewer enables you to view image files in JPG and BMP format, stored on an optional memory card installed in your Magellan RoadMate 2200T. If you have not already done so, you must install the Magellan RoadMate Tools application and transfer files onto the card using the Magellan RoadMate Photo Manager.
OK. Properties To view information on the selected file or folder, press . A thumbnail of the Properties image will be displayed along with the width and height in pixels, the size, and the format Magellan RoadMate Photo Viewer...
Use the arrow keys to select the file or folder you wish to delete. Press the button Delete (trash can). A dialog box will appear asking to confirm your selection. Select to delete the file. About This option will display the current version of the Photo Viewer software. Magellan RoadMate Photo Viewer...
[Attn: Tech. Support]; or E-Mail: magellansupport@magellanGPS.com Warranty Service To obtain warranty service on your Magellan RoadMate 2200T, you must contact us for a return authorization (RA) before you ship the product. Packages arriving at our dock without an RA will be refused. (866) 868-2259...
An adhesive disc mount is supplied with your Magellan RoadMate for use in states where mounting to the windshield is illegal. Thales Navigation does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.
Page 54
Unpack the contents of the Magellan RoadMate 2200T box to make sure that all the components have been included. If you are missing any items or need technical assistance, contact Magellan Support at 866.868.2259 or 909.394.5000. If you have any issues with your Magellan RoadMate, please contact Magellan Support before attempting to return it to the store.
Page 55
The first time the Magellan RoadMate is used it needs certain settings made so that it is configured for your specific use. Note that these settings can be changed later using the System Settings function. Select the language that will be used for displaying text as well as verbal instructions.
Page 56
Please note that the accessories shown here may not be exactly the same as what is in the box but the instructions will still apply. Select where you want to install the Magellan RoadMate. Pick a location where it can be easily seen while driving, either on the windshield or the dash using the adhesive disc. Be sure it is legal where you will be driving to have it mounted on the windshield if you plan on mounting it there.
Page 57
Magellan RoadMate. Align these first and then snap the cradle to the back of the Magellan RoadMate. 4. Attach the adjustable mount to the back of the Magellan RoadMate and cradle assembly. The adjustable mount has two tabs that mate with the cradle. Insert the tabs and press up locking it in place.
Telephone: (866) 339-0488 or (909) 394-5000 (Outside North America); Fax: (909) 394- 7078. Registration Please make sure to register your Magellan RoadMate at www.magellanGPS.com.By registering, you will be informed of the latest product updates. Registration does not qualify as proof of purchase for warranty service.
Page 59
The first time you use your Magellan RoadMate, or if you travel over 500 miles with the unit off, there may be a delay in receiving the initial satellite fix; depending on your position and the position of the satellites, this could take 15 minutes or more. Normal usage will receive the satellite fix much faster, but still may take several minutes.
Main Menu Page 2 Page 1 Displays Map screen. Change map regions when more than one is available. Searches for an address Display and save details to go to. from a trip. Accesses the database of Create a route with POls to select as a multiple destinations.
Page 63
MapScreen ----------------------------.;---- • Map Screen "Hot Keys" with Active Route: (1)- Name of street for next manuever. When tapped displays Locate screen with information about your current location. (1)- Zoom out. Switches between next maneuver icon and heading. Distance to next manuever, when tapped repeats last verbal instruction. Toggles between time to destination and distance to next maneuver.
Page 64
S~ecial Route Screens Route Method - When a destination has been chosen (an address, POI, or intersection) this screen is displayed. Select how you want the route to be calculated. Route Menu - With an active destination, the menu displayed when ®...
Page 65
Address Entry The Magellan RoadMate uses QuickSpell™ to make address entry quick and easy. Only those characters that can be used to spell out a name in the database are predominately displayed, others are grayed out. I Keypad Characters...
Page 66
Address Book The address book stores addresses you have found or created into a conven ient location for future use. Previous Destinations West Wind Motel Previous Desti nations provides a Iist of up to 40 of the last desti nations selected.
Page 67
Points of Interest (POn The Magellan Road Mate has an Select Category extensive list of POls that you can access easily. The POls are sorted into categories and some categories include sub categories to further narrow down your search. ·~.~atches '~j: This is an example of a sub category.
Page 68
User Options POI Selection: Choose which POls will be displayed on the map screen. Address Book Options: Clear all addresses, clear favorite addresses or clear the previous destinations list. Map Options: Select 3D or 20 map view, heading preference and TrueView™ preferences. Select Map Color: Choose from 9 different color schemes for the map.
Page 69
Application Menu Navigation: Places the Magellan RoadMate in vehicle navigation mode. Music: Opens the MP3 Music Player application. Viewer: Opens the Picture Viewer application. System: Opens the System Settings function. Provides access to setting the volume, changing the language, adjusting the brightness, defining the time zone, setting the automatic power off time, changing the units of measure, diagnostics and information on the Magellan RoadMate firmware.
Page 70
If you need technical assistance or "how-to" help, or if you have atechnical question about the functionality of your Magellan product, please contact us on the Internet at www.magellanGPS.com or reach us by fax or by phone. Our Technical Support phone representatives are available Monday through Friday, 6:00 a.m. to 5:00 p.m. PST/PDT.
Page 73
A CD-ROM of the Reference Manual is currently not available. Please visit the support area of www.ma2ellanGPS.com for complete product details and information on availability of the Reference Manual and firmware updates.
THALES NAVIGATION MAGELLAN PRODUCTS LIMITED WARRANTY All Thales Navigation global positioning system (GPS) receivers are navigation aids, and are not intended to replace other methods of navigation. Purchaser is advised to perform careful position charting and use good judgment. READ THE USER GUIDE CAREFULLY BEFORE USING THE PRODUCT.
Page 75
(5) any damage caused by (i) shipping, misuse, abuse, negligence, tampering, or improper use; (ii) disasters such as fire, flood, wind, and lightning; (iii) unauthorized attachments or modification; (6) service performed or attempted by anyone other than an authorized Thales Navigation Service Center;...
Page 76
Agreement. User Restrictions. The Software may only be used on a single computer and on a single Magellan GPS receiver owned or leased by you. You may not operate the Software in a time-sharing or service bureau operation, on a temporary or perma- nent basis, without the prior written consent of Licensor.
Page 77
Licensor and its third-party suppliers (and their third-party suppliers) shall have no liability to you or any third party for special, incidental, indirect or consequential damages (including, but not limited to, loss of profits or savings, downtime, damage to or replacement of equipment and property, or recovery or replacement of programs or data) arising from claims based in warranty, contract, tort (including negligence), strict liability, or otherwise even if Licensor or its third-party supplies have been advised of the possibility of such claim or damages.
Page 78
~~GELLAts Magellan Extended Warranty Program Take advantage of this great opportunity to extend the life of your Magellan@ product warranty for two additional years The Magellan Extended Warranty Program provides you with a single point of contact for reliable end-to-end service and avoids expensive time and material repairs.
Page 79
Covered Products. Written notice of cancellation will be chaser. This document, together with the Thales Navigation Magellan Products Limited mailed to you at your last known address not less than 60 days before cancellation is effec- Warranty ("Limited Warranty") that accompanied the products when purchased, sets forth...
Need help?
Do you have a question about the RoadMate 2200T and is the answer not in the manual?
Questions and answers