Button And Lcd Test; Waste Ink Amount Setting - Canon PIXMA MP950 Service Manual

4 times Green (COPY)
5 times Orange (Alarm)
6 times Green (COPY)
7 times Orange (Alarm)
8 times Green (COPY)
9 times Orange (Alarm)
10 times Green (COPY)
11 times Orange (Alarm)
12 times Green (COPY)
13 times
Orange (Alarm)
14 times Green (COPY)
15 times Orange (Alarm)
16 to 21 times Green at even numbers
(COPY)
Orange at odd numbers
(Alarm)
Note: - If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or COPY button (green) lights steadily without any changes.
- At the end of the service mode, press the ON/OFF button. The paper lifting plate of the sheet feeder unit will be raised.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the table below,
and press the ON/OFF button.
Time(s) LED indication
0 times Green (COPY)
1 time Orange (Alarm)
2 times Green (COPY)
3 times Orange (Alarm)
4 times Green (COPY)
5 times Orange (Alarm)
6 times Green (COPY)
7 times Orange (Alarm)
8 times Green (COPY)
9 times or
Orange (Alarm)
more
Note: After setting the destination without logic board replacement, be sure to initialize the EEPROM (to prevent the Print Beam
settings or copy paper settings from being different from the destination settings).
Confirm the model name and destination in service test print or EEPROM information print.
[See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
<Button and LCD test procedures>
Confirm the operation after replacement of the operation panel unit, logic board, or LCD.
1) In a test mode, press the Stop/Reset button one time. The LCD turns blue, waiting for a button to be pressed.
Waste ink counter resetting
Destination settings
Print head deep cleaning
LF correction
CD / DVD check pattern print Not used in servicing
CD / DVD print position
correction (horizontal: X
direction)
CD / DVD print position
correction (vertical: Y
direction)

Button and LCD test

Return to the menu selection
Return to the menu selection
Left margin correction

Waste ink amount setting

Return to the menu selection
Destination
No change of the destination
Japan
Korea
US
Europe
Australia
Asia
China
Taiwan
Return to the menu selection
1-26
- CD / DVD correction value
- LF correction value
Once in the service mode: Press the On/Off
button 2x after pressing the Stop button 4x.
See 3-3. Adjustment / Settings, (8) Service mode,
"Destination settings procedures."
(Cleaning of both black and color)
Not used for MP950
Not used in servicing.
Not used in servicing.
See 3-3. Adjustment / Settings, (8) Service mode, "Button
and LCD test procedures"
Not used in servicing.
See 3-3. Adjustment / Settings, (8) Service mode, "Waste
ink amount setting procedures"
Supported
Not supported
Not supported
Supported
Supported
Supported
Supported
Supported
CD / DVD print