Connecting the telephone ¤ Connect the telephone connector (1) to the main phone socket using the supplied telephone cable. ¤ Guide the cable through the cable channel of the handset cradle: upwards for operating the phone on the table (2); downwards when mount- ing the phone on the wall (3).
u For your safety and protection, Dialling and saving the telephone may not be used numbers in the bath or shower rooms (wet locations). The telephone is not Dialling a number splash proof. u Never expose the telephone to Lift the handset, dial sources of heat, direct sunlight or the number.
Dialling a speed dial number Mute Lift the handset, press You can deactivate the telephone's the speed dial key. microphone during a call. Press the speed dial Press the mute key. number key. To reactivate microphone: Press the Notes on saving and deleting mute key again or press any other key.
Changing the dialling mode/ Recall key flash time In public telephone systems, the recall key is required to use certain The telephone supports the follow- additional services; e.g. for "Call back ing dialling modes: on busy". T2: Tone dialling, flash time 280 ms You may need to adjust the flash T1:Tone dialling, flash time 100 ms time of your telephone to the needs...
European Directive 2002/96/EC. Our environmental statement The correct disposal and separate We at Gigaset Communications collection of your old appliance will GmbH are aware of our social help prevent potential negative con- responsibility. That is why we...
Need help?
Do you have a question about the DA310 and is the answer not in the manual?
Questions and answers