Kenwood DNX7210BT Quick Start Manual page 9

Number Name
fi (Reset)
1
ATT
2
∞, 5 (Vol)
3
AUD
4
NAV
5
MENU
6
TEL
7
0 (Eject)
8
Remote
9
Sensor
Disc insert
10
slot
SD card slot
11
* T he display may not switch to the Graphic Equalizer screen in some conditions.
• If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.99).
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (Instruction Manual P.72).
• Switches attenuation of the volume on/off.
• Pressing for 1 second turns the screen off.
Adjusts volume.
• Displays Graphic Equalizer screen (Instruction Manual P.87).*
• Pressing for 1 second switches camera view display on/off.
• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• Displays the Top Menu screen (Instruction Manual P.17).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Displays the Hands Free screen (Instruction Manual P.54).
• Pressing for 1 second displays the Screen Control screen.
• Ejects the disc.
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
• Receives the remote control signal.
• You can enable or disable this feature by Remote Sensor (Instruction
Manual P.70).
• If [Remote Sensor] is set to off, the remote control of TV reception is
rejected.
A slot to insert a disc media.
A slot to insert an SD card. The card is used for upgrading the map. For
how to upgrade the map, refer to the instruction manual of the navigation
system.
Also, you can play audio/visual file in the card.
9
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT
Motion