Do you have a question about the EM3500SX and is the answer not in the manual?
Questions and answers
José calvo
February 9, 2025
Motor no enciende llave de encendido da la señal de arranque tiene chispa de encendido tiene gasolina
1 comments:
Mr. Anderson
February 11, 2025
If the Honda EM3500SX motor won't start despite having a working ignition key, spark, and fuel, consider the following possible causes:
1. Oil Alert System: Check if the oil alert lamp flashes when pulling the starter. If the oil level is too low, the system will prevent the engine from starting. 2. Loads Connected to AC Receptacles: Ensure all electrical loads are disconnected from the generator's AC receptacles. 3. Battery Condition: If the starter motor speed drops, the battery may need recharging. 4. Choke and Auto-Throttle: Ensure the choke is properly positioned and the auto-throttle switch is set correctly if using the auto-throttle system. 5. Fuel System Issues: Verify that the fuel valve is open, the sediment cup is clean, and the carburetor is not clogged.
If these checks do not resolve the issue, further inspection by an authorized Honda dealer may be necessary.
Need help?
Do you have a question about the EM3500SX and is the answer not in the manual?
Questions and answers
Motor no enciende llave de encendido da la señal de arranque tiene chispa de encendido tiene gasolina
If the Honda EM3500SX motor won't start despite having a working ignition key, spark, and fuel, consider the following possible causes:
1. Oil Alert System: Check if the oil alert lamp flashes when pulling the starter. If the oil level is too low, the system will prevent the engine from starting.
2. Loads Connected to AC Receptacles: Ensure all electrical loads are disconnected from the generator's AC receptacles.
3. Battery Condition: If the starter motor speed drops, the battery may need recharging.
4. Choke and Auto-Throttle: Ensure the choke is properly positioned and the auto-throttle switch is set correctly if using the auto-throttle system.
5. Fuel System Issues: Verify that the fuel valve is open, the sediment cup is clean, and the carburetor is not clogged.
If these checks do not resolve the issue, further inspection by an authorized Honda dealer may be necessary.
This answer is automatically generated