Connecting Other Equipment - Sanyo LCD-27XA2 Instruction Manual

Connecting Other Equipment

You can connect a VCR, S-VHS VCR, Satellite Tuner, PAY TV Decoder, DVD or Camcoder to
this TV via the AV terminals and the SCART terminal.
Depending on the type of video tape or connected AV equipment being used, it may be
necessary to select colour system. In this case, press the Recall/Colour System button
and select a suitable colour system. Colour system setting for AV position is automatically
stored in the memory.
By pressing the Stereo/Mono button repeatedly, you can select the sound track L
(left), R (right) or L/R.
You can select and return to a TV programme by selecting any of the TV position while
watching a playback from a VCR, DVD, etc.
S-Video Connection through Scart Terminal Adaptor
When you use a S-VHS VCR not provided with the 21-pins scart terminal, connect it with the
AV2 terminal using Scart Terminal Adaptor, and set AV2 status on "S-Video" (Refer to the
Setting Menu on page 16).
L R
Y
C
B
L
C
R
L
R
AUDIO
AV2
AV3
R
AV5
DVD INPUT
Select "AV2" mode by pressing the TV/AV Selector for watching.
Important Note:
Do not input to both S-Video and RCA video input jack of the Scart Terminal Adaptor at the
same time to avoid signal mix and distorted picture.
S-Video Jack
L
R
AV1
Scart Terminal Adapter
(Supplied with TV set)
PLAYBACK
To S-Video output
To audio output
S-VHS VCR
DVD
DVD Player etc.
23
23